B1E60 Jeep Code - 3rd Row Seat Right Latch Switch Circuit Performance
Quick Answer
The Power Rear Folding Seat Module monitors the Right Seat Latch Switch. Common causes include Faulty Right Seat Latch Switch, Right Seat Latch Switch harness is open or shorted, Right Seat Latch Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E60 Jeep indicates 3rd Row Seat Right Latch Switch Circuit Performance.
- Common causes
- Common causes include Faulty Right Seat Latch Switch, Right Seat Latch Switch harness is open or shorted, Right Seat Latch Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1E60 Jeep Description
What are the Possible Causes of the DTC B1E60 Jeep?
- Faulty Right Seat Latch Switch
- Right Seat Latch Switch harness is open or shorted
- Right Seat Latch Switch circuit poor electrical connection
- Faulty Right Power Rear Folding Seat Latch Actuator
- Faulty Power Rear Folding Seat Module
How to Fix the DTC B1E60 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1E60 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1E60 Jeep code?
Need more information on how to fix the B1E60 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E60 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E60 Jeep Code
What does OBDII code B1E60 mean for a Jeep?
Code B1E60 indicates an issue with the 3rd Row Seat Right Latch Switch Circuit Performance, which monitors the operation of the right latch on the third-row seat.
What are the symptoms of code B1E60 on a Jeep?
Common symptoms include difficulty or failure in latching/unlatching the third-row seat, warning lights on the dashboard, or stored trouble codes without noticeable seat functionality issues.
What causes code B1E60 on a Jeep?
This code is typically caused by a faulty latch switch, wiring issues, poor electrical connections, or a malfunctioning control module related to the 3rd-row seat.
Can I still drive my Jeep with code B1E60 present?
Yes, you can still drive the vehicle, but the third-row seat latch functionality may be compromised, which could pose a safety risk if the seat is not securely latched.
How can I diagnose code B1E60 on a Jeep?
Start by inspecting the wiring and connectors for damage or corrosion. Use a multimeter to test the latch switch circuit and confirm proper operation of the switch.
How do I fix code B1E60 on my Jeep?
Repairs may include replacing the faulty 3rd-row seat latch switch, repairing damaged wiring or connectors, or recalibrating the seat latch system with a diagnostic tool.
Is code B1E60 covered under warranty for a Jeep?
Depending on the vehicle’s warranty terms and the age of the car, the issue may be covered under a factory warranty. Check with your dealership for specific coverage.
Can a faulty latch switch trigger code B1E60 on a Jeep?
Yes, a malfunctioning latch switch can directly cause code B1E60, as the system detects irregular performance in the latch circuit.
Does code B1E60 affect other systems in the Jeep?
Code B1E60 typically does not affect other systems, but it could trigger related alerts if the seat position sensor or other components in the latch system are interconnected.
How much does it cost to repair code B1E60 on a Jeep?
Repair costs vary depending on the issue. A latch switch replacement might cost $100-$300, while wiring repairs or module replacements could be more expensive. Labor costs depend on the complexity of the repair.
Discuss the causes and fixes for B1E60 Jeep OBDII Code
Code B1E60 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
