B1E50 Jeep Code - 3rd Row Right Stow/Tailgate Control Circuit Performance
Quick Answer
The Power Rear Folding Seat Module monitors the Right Stow/Tailgate Position Sensor. Common causes include Faulty Right Stow/Tailgate Position Sensor, Right Stow/Tailgate Position Sensor harness is open or shorted, Right Stow/Tailgate Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E50 Jeep indicates 3rd Row Right Stow/Tailgate Control Circuit Performance.
- Common causes
- Common causes include Faulty Right Stow/Tailgate Position Sensor, Right Stow/Tailgate Position Sensor harness is open or shorted, Right Stow/Tailgate Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1E50 Jeep Description
What are the Possible Causes of the DTC B1E50 Jeep?
- Faulty Right Stow/Tailgate Position Sensor
- Right Stow/Tailgate Position Sensor harness is open or shorted
- Right Stow/Tailgate Position Sensor circuit poor electrical connection
- Faulty Right Power Rear Folding Seat Stow Motor
- Faulty Power Rear Folding Seat Module
How to Fix the DTC B1E50 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1E50 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1E50 Jeep code?
Need more information on how to fix the B1E50 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E50 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E50 Jeep Code
1. What does the OBDII code B1E50 mean for a Jeep?
The B1E50 code indicates an issue with the 3rd Row Right Stow/Tailgate Control Circuit Performance, typically related to an electrical malfunction in the stow or tailgate system.
2. What are the common symptoms of the B1E50 code?
Symptoms may include the 3rd-row seat not stowing properly, tailgate operation issues, or an illuminated check engine light or related warning light.
3. What causes the B1E50 code to appear?
Common causes include damaged wiring, a faulty control module, a malfunctioning actuator, or a short or open circuit in the stow/tailgate system.
4. How can I diagnose the B1E50 code?
Start by checking the wiring and connectors for damage or corrosion, then test the tailgate or seat actuator for functionality. Use a scan tool to monitor the control module's communication.
5. Can I still drive my Jeep with the B1E50 code?
Yes, it’s usually safe to drive, but the affected 3rd-row seat or tailgate functions may be inoperable or unreliable until the issue is resolved.
6. How do I fix the B1E50 code?
Repairs often involve replacing damaged wires, repairing connections, or replacing the faulty actuator or control module responsible for the stow/tailgate system.
7. How much does it cost to fix the B1E50 code?
Repair costs can vary widely depending on the issue, ranging from $50 to $500, depending on whether it's a simple wiring repair or a component replacement.
8. Can the B1E50 code reset itself?
In rare cases, the code may clear if the issue resolves temporarily, but it’s likely to return until the root cause is fixed.
9. Do I need specialized tools to fix the B1E50 code?
You’ll typically need a diagnostic scan tool, a multimeter for electrical testing, and possibly specialty tools for removing trim to access wiring or actuators.
10. Is the B1E50 code specific to Jeep vehicles?
While the code format is universal for OBDII, the specific description and application (3rd Row Right Stow/Tailgate Circuit) are tailored to Jeep and may not apply to other vehicle brands.
Discuss the causes and fixes for B1E50 Jeep OBDII Code
Code B1E50 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
