B1E49 Chrysler Code - 3rd Row Seat Right Backrest Position Sensor Circuit Low
Quick Answer
The Power Rear Folding Seat Module monitors the Right Backrest Position Sensor. Common causes include Faulty Right Backrest Position Sensor, Right Backrest Position Sensor harness is open or shorted, Right Backrest Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E49 Chrysler indicates 3rd Row Seat Right Backrest Position Sensor Circuit Low.
- Common causes
- Common causes include Faulty Right Backrest Position Sensor, Right Backrest Position Sensor harness is open or shorted, Right Backrest Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1E49 Chrysler Description
What are the Possible Causes of the DTC B1E49 Chrysler?
- Faulty Right Backrest Position Sensor
- Right Backrest Position Sensor harness is open or shorted
- Right Backrest Position Sensor circuit poor electrical connection
- Faulty Right Power Rear Folding Seat Back Motor
- Faulty Power Rear Folding Seat Module
How to Fix the DTC B1E49 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1E49 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1E49 Chrysler code?
Need more information on how to fix the B1E49 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E49 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E49 Chrysler Code
1. What are the common symptoms of OBDII code B1E49 in a Chrysler related to the 3rd Row Seat Right Backrest Position Sensor Circuit Low?
The common symptoms include the third-row right seat backrest not adjusting properly or moving to the desired position, and the seat backrest being stuck in one position.
2. What are the potential causes of the OBDII code B1E49 in a Chrysler indicating 3rd Row Seat Right Backrest Position Sensor Circuit Low?
Possible causes include a faulty right backrest position sensor, damaged wiring or connectors in the circuit, or a malfunction in the seat control module.
3. How can I diagnose the OBDII code B1E49 in a Chrysler for the 3rd Row Seat Right Backrest Position Sensor Circuit Low?
Diagnosis involves inspecting the wiring and connectors for any visible damage, testing the right backrest position sensor for proper operation, and using a scan tool to check the seat control module for fault codes.
4. Can I drive my Chrysler if the OBDII code B1E49 is triggered due to the 3rd Row Seat Right Backrest Position Sensor Circuit Low?
It is not recommended to drive the vehicle with this issue as the proper functioning of the seat backrest position sensor is crucial for safety and comfort while driving.
5. How can I repair the OBDII code B1E49 related to the 3rd Row Seat Right Backrest Position Sensor Circuit Low in my Chrysler?
Repair may involve replacing the right backrest position sensor, repairing any damaged wiring or connectors, or reprogramming the seat control module if necessary.
6. Is it possible to reset the OBDII code B1E49 in a Chrysler for the 3rd Row Seat Right Backrest Position Sensor Circuit Low?
After repairing the underlying issue causing the code, the code can be cleared using an OBDII scanner or by disconnecting the car battery for a few minutes.
7. Is the OBDII code B1E49 related to the 3rd Row Seat Right Backrest Position Sensor Circuit Low a common issue in Chrysler vehicles?
While not extremely common, issues with seat position sensors and related circuits can occur in Chrysler vehicles, especially as they age or if there is a history of electrical problems.
8. Are there any preventive measures to avoid triggering the OBDII code B1E49 in a Chrysler due to the 3rd Row Seat Right Backrest Position Sensor Circuit Low?
Regularly checking the functionality of the seat adjustment system, addressing any issues promptly, and keeping the interior of the vehicle clean can help prevent such codes from being triggered.
9. Can a DIY enthusiast without advanced automotive knowledge repair the OBDII code B1E49 related to the 3rd Row Seat Right Backrest Position Sensor Circuit Low in a Chrysler?
While some basic knowledge of automotive electrical systems is helpful, it is recommended to consult a professional mechanic or technician for proper diagnosis and repair of this issue.
10. How long does it typically take to repair the OBDII code B1E49 in a Chrysler caused by the 3rd Row Seat Right Backrest Position Sensor Circuit Low?
The repair time can vary depending on the exact cause of the issue, but it may take anywhere from a few hours to a day to diagnose and fix the problem related to the seat backrest position sensor circuit.
Discuss the causes and fixes for B1E49 Chrysler OBDII Code
Code B1E49 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
