AutoCodes – Jeep – B1E41 Jeep

B1E41 Jeep Code - 3rd Row Seat Left Backrest Control Circuit Performance

Quick Answer

The Power Rear Folding Seat Module monitors the Seat Position Sensor. Common causes include Faulty Seat Position Sensor, Seat Position Sensor harness is open or shorted, Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1E41 Jeep indicates 3rd Row Seat Left Backrest Control Circuit Performance.
Common causes: Common causes include Faulty Seat Position Sensor, Seat Position Sensor harness is open or shorted, Seat Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 452

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 03, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1E41 Jeep Description

The Power Rear Folding Seat Module monitors the Seat Position Sensor. If the Power Rear Folding Seat Module does not detect seat motor rotation from the motor position sensor after a switch activation input, this Diagnostic Trouble Code (DTC) will set.

OBDII Code B1E41 Jeep - 3rd Row Seat Left Backrest Control Circuit Performance - AutoCodes.com — B1E41 Jeep Code - 3rd Row Seat Left Backrest Control Circuit Performance

What does this mean?

What are the Possible Causes of the DTC B1E41 Jeep?

Faulty Seat Position Sensor
Seat Position Sensor harness is open or shorted
Seat Position Sensor circuit poor electrical connection
Faulty Left Power Rear Folding Seat Back Motor
Faulty Power Rear Folding Seat Module

How to Fix the DTC B1E41 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1E41 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1E41 Jeep code?

Need more information on how to fix the B1E41 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1E41 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1E41 Jeep Code

1. What does OBDII code B1E41 mean on a Jeep?

Code B1E41 indicates an issue with the 3rd Row Seat Left Backrest Control Circuit, specifically a performance problem.

2. What are the common symptoms of code B1E41 in a Jeep?

Symptoms include the 3rd row left backrest not adjusting properly, unresponsiveness to seat adjustment controls, or intermittent operation.

3. What causes code B1E41 in a Jeep?

Common causes include a faulty motor for the left backrest, damaged wiring or connectors, or a malfunctioning seat control module.

4. Can I still drive my Jeep with code B1E41 active?

Yes, you can still drive the vehicle, but the left backrest in the 3rd row may not function properly, which could inconvenience passengers.

5. How do I diagnose the B1E41 code on a Jeep?

Diagnosis involves inspecting the wiring and connectors for damage, testing the backrest motor, and scanning for additional codes related to the seat control module.

6. How can I fix code B1E41 in a Jeep?

Repairs may include replacing damaged wiring, repairing or replacing the backrest motor, or recalibrating or replacing the seat control module.

7. How much does it cost to fix B1E41 on a Jeep?

Repair costs vary but can range from $100 to $500, depending on whether the issue involves simple wiring repairs or replacing components like the motor or module.

8. Is there a way to reset code B1E41 after repairs?

Yes, after addressing the issue, you can reset the code using an OBDII scanner, but ensure the problem is fully resolved first.

9. Can cold weather cause code B1E41 to appear in a Jeep?

Cold weather can sometimes cause electrical components or motors to malfunction temporarily, but a persistent code typically points to a deeper issue.

10. Should I take my Jeep to a professional for code B1E41?

If you're not experienced with electrical diagnostics or repairs, it's recommended to have a professional mechanic address the issue to prevent further damage.