B1E41 Chrysler Code - 3rd Row Seat Left Backrest Control Circuit Performance
Quick Answer
The Power Rear Folding Seat Module monitors the Seat Position Sensor. Common causes include Faulty Seat Position Sensor, Seat Position Sensor harness is open or shorted, Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E41 Chrysler indicates 3rd Row Seat Left Backrest Control Circuit Performance.
- Common causes
- Common causes include Faulty Seat Position Sensor, Seat Position Sensor harness is open or shorted, Seat Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1E41 Chrysler Description
What are the Possible Causes of the DTC B1E41 Chrysler?
- Faulty Seat Position Sensor
- Seat Position Sensor harness is open or shorted
- Seat Position Sensor circuit poor electrical connection
- Faulty Left Power Rear Folding Seat Back Motor
- Faulty Power Rear Folding Seat Module
How to Fix the DTC B1E41 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1E41 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1E41 Chrysler code?
Need more information on how to fix the B1E41 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E41 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E41 Chrysler Code
1. What are common symptoms of the OBDII code B1E41 Chrysler?
The common symptoms associated with the B1E41 Chrysler code include the 3rd-row seat left backrest not moving, erratic seat movement, or complete failure of the seat control.
2. What causes the OBDII code B1E41 Chrysler to trigger?
The B1E41 Chrysler code is triggered when the powertrain control module (PCM) detects a performance issue in the 3rd-row seat left backrest control circuit, which could be caused by wiring issues, a faulty seat control module, or a malfunctioning motor.
3. How can I diagnose the OBDII code B1E41 Chrysler?
To diagnose the B1E41 Chrysler code, you can start by inspecting the wiring and connectors related to the 3rd-row seat left backrest control circuit, testing the seat control module and motor for proper functionality, and using a diagnostic scan tool to retrieve and analyze the fault codes.
4. Is it safe to drive with the OBDII code B1E41 Chrysler active?
It is generally safe to drive with the B1E41 Chrysler code active, but it is recommended to address the issue promptly to avoid any inconvenience caused by the malfunctioning 3rd-row seat left backrest control.
5. Can I reset the OBDII code B1E41 Chrysler without fixing the underlying issue?
Resetting the B1E41 Chrysler code without fixing the underlying issue will only temporarily clear the code. The issue will likely resurface, and it is important to diagnose and repair the root cause to prevent further problems.
6. What are some repair tips for the OBDII code B1E41 Chrysler?
Repair tips for the B1E41 Chrysler code include checking for loose or damaged wiring, ensuring proper connections, testing the seat control module and motor, and seeking professional help if needed for a comprehensive diagnosis and repair.
7. How much does it cost to fix the OBDII code B1E41 Chrysler?
The cost to fix the B1E41 Chrysler code can vary depending on the underlying issue causing the fault. Simple fixes like repairing wiring or connectors may be relatively inexpensive, while replacing the seat control module or motor could be more costly.
8. Can a DIY enthusiast repair the OBDII code B1E41 Chrysler?
DIY enthusiasts with automotive repair experience may be able to address the B1E41 Chrysler code by following repair guides, using the right tools, and conducting thorough diagnostics. However, professional assistance is recommended for complex issues.
9. Will the OBDII code B1E41 Chrysler cause my vehicle to fail an emissions test?
The B1E41 Chrysler code is related to the 3rd-row seat left backrest control circuit and is unlikely to cause your vehicle to fail an emissions test. However, it is still important to address the issue to ensure proper functionality of the seat control system.
10. How long does it typically take to repair the OBDII code B1E41 Chrysler?
The repair time for the B1E41 Chrysler code can vary depending on the extent of the issue and the availability of parts. Simple fixes may take a few hours, while more complex repairs could require a day or more, especially if professional assistance is needed.
Discuss the causes and fixes for B1E41 Chrysler OBDII Code
Code B1E41 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
