B1E31 Jeep Code - 3rd Row Seat Left Backrest Switch Stuck Rearward
Quick Answer
The Power Rear Folding Seat Module monitors the 3rd Row Seat Mode Select Switch Circuit. Common causes include Faulty Left Power Rear Folding Seat Recliner Switch, Left Power Rear Folding Seat Recliner Switch harness is open or shorted, Left Power Rear Folding Seat Recliner Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E31 Jeep indicates 3rd Row Seat Left Backrest Switch Stuck Rearward.
- Common causes
- Common causes include Faulty Left Power Rear Folding Seat Recliner Switch, Left Power Rear Folding Seat Recliner Switch harness is open or shorted, Left Power Rear Folding Seat Recliner Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1E31 Jeep Description
What are the Possible Causes of the DTC B1E31 Jeep?
- Faulty Left Power Rear Folding Seat Recliner Switch
- Left Power Rear Folding Seat Recliner Switch harness is open or shorted
- Left Power Rear Folding Seat Recliner Switch circuit poor electrical connection
- Faulty Power Rear Folding Seat Module
How to Fix the DTC B1E31 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1E31 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1E31 Jeep code?
Need more information on how to fix the B1E31 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E31 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E31 Jeep Code
1. What are the common symptoms of OBDII code B1E31 in a Jeep related to the 3rd Row Seat Left Backrest Switch Stuck Rearward?
The common symptoms include the inability to adjust the left backrest of the third-row seat forward, backward, or to different positions.
2. What typically causes the OBDII code B1E31 in a Jeep pertaining to the 3rd Row Seat Left Backrest Switch Stuck Rearward?
The most common cause is a mechanical issue with the left backrest switch, such as a stuck or faulty switch mechanism.
3. How can I diagnose the issue related to OBDII code B1E31 for the 3rd Row Seat Left Backrest Switch in a Jeep?
You can start by visually inspecting the switch for any visible damage or obstruction. You may also use a multimeter to test the switch for continuity.
4. Can a DIY enthusiast repair the OBDII code B1E31 issue with the 3rd Row Seat Left Backrest Switch in a Jeep?
Yes, if the issue is related to a faulty switch, it can potentially be repaired by replacing the switch with a new one. However, it's recommended to follow proper repair procedures.
5. Are there any temporary fixes for the OBDII code B1E31 problem with the 3rd Row Seat Left Backrest Switch in a Jeep?
Temporary fixes may include trying to gently manipulate the switch to see if it can be unstuck temporarily. However, a permanent solution would involve addressing the root cause of the issue.
6. Is it safe to continue driving with the OBDII code B1E31 related to the 3rd Row Seat Left Backrest Switch issue in a Jeep?
While the vehicle may still be operable, it's best to address the problem promptly to ensure proper functionality of the seat adjustment mechanism and avoid potential safety hazards.
7. Can weather conditions or environmental factors contribute to the OBDII code B1E31 problem with the 3rd Row Seat Left Backrest Switch in a Jeep?
Extreme temperatures or humidity levels can potentially affect the operation of the switch mechanism, leading to issues like sticking or malfunctioning switches.
8. How long does it typically take to repair the OBDII code B1E31 issue associated with the 3rd Row Seat Left Backrest Switch in a Jeep?
The repair time can vary depending on the exact cause of the problem and the expertise of the person performing the repair. It may range from a quick switch replacement to a more involved troubleshooting process.
9. Should I reset the OBDII code B1E31 after fixing the 3rd Row Seat Left Backrest Switch issue in my Jeep?
Yes, it's recommended to reset the OBDII code after addressing the problem to clear the error code from the system and ensure that the repair was successful.
10. Are there any recalls or technical service bulletins related to the OBDII code B1E31 issue with the 3rd Row Seat Left Backrest Switch in a Jeep?
It's advisable to check with the manufacturer or authorized service centers to inquire about any relevant recalls or technical service bulletins that may apply to this specific issue.
Discuss the causes and fixes for B1E31 Jeep OBDII Code
Code B1E31 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
