AutoCodes – Jeep – B1D92 Jeep

B1D92 Jeep Code - Steering Column Tilt Position Sensor Circuit High

Quick Answer

The tilt, telescoping and electronic telescoping column has been designed to be serviced as an assembly; less wiring, switches, shrouds, steering wheel, etc. Common causes include Faulty Steering Column Tilt Position Sensor, Steering Column Tilt Position Sensor harness is open or shorted, Steering Column Tilt Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1D92 Jeep indicates Steering Column Tilt Position Sensor Circuit High.
Common causes: Common causes include Faulty Steering Column Tilt Position Sensor, Steering Column Tilt Position Sensor harness is open or shorted, Steering Column Tilt Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 535

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 02, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1D92 Jeep Description

The tilt, telescoping and electronic telescoping column has been designed to be serviced as an assembly; less wiring, switches, shrouds, steering wheel, etc. Most steering column components can be serviced without removing the steering column from the vehicle. The Memory Seat Module (MSM) input signal from the Steering Column Telescope Sensor is recognized in a specified voltage area. The input channel is an analog to digital converter input and the sensor is a hall sensor. The hall supply voltage is switched on when the motor becomes activated. The Diagnostic Trouble Code (DTC) is set if the sensed input is recognized in a defined voltage area (between 3.7 and 5.0 volts at the controller input, not at the module input) for more than 14 mS.

OBDII Code B1D92 Jeep - Steering Column Tilt Position Sensor Circuit High - AutoCodes.com — B1D92 Jeep Code - Steering Column Tilt Position Sensor Circuit High

What does this mean?

What are the Possible Causes of the DTC B1D92 Jeep?

Faulty Steering Column Tilt Position Sensor
Steering Column Tilt Position Sensor harness is open or shorted
Steering Column Tilt Position Sensor circuit poor electrical connection
Faulty Steering Column Tilt Motor
Faulty Memory Seat Module (MSM)

How to Fix the DTC B1D92 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1D92 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1D92 Jeep code?

Need more information on how to fix the B1D92 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1D92 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1D92 Jeep Code

1. What does the OBDII code B1D92 mean on a Jeep?

The B1D92 code indicates a problem with the Steering Column Tilt Position Sensor Circuit, specifically a high voltage issue.

2. What are the common symptoms of the B1D92 code?

Symptoms may include an inoperative steering column tilt feature, a warning light on the dashboard, or stored trouble codes in the vehicle's computer.

3. What causes the B1D92 code to appear?

Common causes include a faulty steering column tilt position sensor, damaged wiring or connectors, or issues with the vehicle's control module.

4. How can I diagnose the B1D92 code?

Diagnosis involves using an OBDII scanner to confirm the code, inspecting the tilt position sensor, and checking the wiring and connectors for damage or corrosion.

5. Can I drive my Jeep with the B1D92 code?

Yes, but the steering column tilt function may not work, and ignoring the issue could lead to further electrical problems.

6. How do I fix the B1D92 code on my Jeep?

Repairs might include replacing the steering column tilt position sensor, repairing damaged wiring, or replacing corroded connectors.

7. How much does it cost to fix the B1D92 code?

The cost varies depending on the issue, but replacing the tilt position sensor typically costs $150â€“$300, including parts and labor.

8. Can a dead battery cause the B1D92 code?

A weak or dead battery is unlikely to cause this specific code, but electrical issues could exacerbate the problem.

9. Is the B1D92 code related to other steering issues?

While the code specifically pertains to the tilt position sensor, it could indirectly affect other steering column functions if left unresolved.

10. Do I need a professional to fix the B1D92 code?

If you're comfortable with basic electrical diagnostics and repairs, you can attempt it yourself. Otherwise, consult a professional mechanic for accurate diagnosis and repair.