AutoCodes – Jeep – B1D8B Jeep

B1D8B Jeep Code - Steering Column Telescope Position Sensor Circuit Short To Ground

Quick Answer

The tilt, telescoping, and electronic telescoping column has been designed to be serviced as an assembly; less wiring, switches, shrouds, steering wheel, etc. Common causes include Faulty Steering Column Telescope Position Sensor, Steering Column Telescope Position Sensor harness is open or shorted, Steering Column Telescope Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1D8B Jeep indicates Steering Column Telescope Position Sensor Circuit Short To Ground.
Common causes: Common causes include Faulty Steering Column Telescope Position Sensor, Steering Column Telescope Position Sensor harness is open or shorted, Steering Column Telescope Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 600

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 02, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1D8B Jeep Description

The tilt, telescoping, and electronic telescoping column has been designed to be serviced as an assembly; less wiring, switches, shrouds, steering wheel, etc. Most steering column components can be serviced without removing the steering column from the vehicle. The Memory Seat Module (MSM) input signal from the Steering Column Telescope Sensor is recognized in a specified voltage area. The input channel is an analog to digital converter input and the sensor is a hall sensor. The hall supply voltage is switched on when the motor becomes activated. The Diagnostic Trouble Code (DTC) is set when the MSM detects that the Telescope Position Sensor signal input voltage is below a minimum calibrated value.

OBDII Code B1D8B Jeep - Steering Column Telescope Position Sensor Circuit Short To Ground - AutoCodes.com — B1D8B Jeep Code - Steering Column Telescope Position Sensor Circuit Short To Ground

What does this mean?

What are the Possible Causes of the DTC B1D8B Jeep?

Faulty Steering Column Telescope Position Sensor
Steering Column Telescope Position Sensor harness is open or shorted
Steering Column Telescope Position Sensor circuit poor electrical connection
Faulty Steering Column Telescope Motor
Faulty Memory Seat Module (MSM)

How to Fix the DTC B1D8B Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1D8B Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1D8B Jeep code?

Need more information on how to fix the B1D8B Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1D8B Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1D8B Jeep Code

What does the OBDII code B1D8B indicate in a Jeep?

The B1D8B code indicates a problem with the steering column telescope position sensor circuit, specifically a short to ground condition.

What symptoms might I experience if my Jeep has the B1D8B code?

Common symptoms include malfunctioning steering column adjustments, dashboard warning lights, and possibly difficulty in steering or controlling the vehicle.

What could cause the B1D8B code to trigger?

The code can be triggered by a short circuit in the wiring, a faulty steering column telescope position sensor, or issues with connectors in the circuit.

How can I diagnose the B1D8B code effectively?

Start by visually inspecting the wiring and connectors for damage, then use a multimeter to check for continuity and shorts in the circuit, and finally test the steering column telescope position sensor.

What are some common repair steps for fixing the B1D8B code?

Repairs may include repairing or replacing damaged wiring, replacing a faulty steering column telescope position sensor, or ensuring all connections are secure and free of corrosion.

Can I drive my Jeep with the B1D8B code?

It is not recommended to drive with this code, as it may affect the steering functionality and could lead to unsafe driving conditions.

Will clearing the B1D8B code resolve the issue?

Clearing the code may temporarily turn off the warning light, but if the underlying issue is not fixed, the code will likely return.

How much will it cost to fix the B1D8B code in my Jeep?

Repair costs can vary widely, but typically range from $100 to $500 depending on whether wiring repairs or sensor replacements are needed.

Is the B1D8B code specific to certain Jeep models?

While the B1D8B code can appear in various Jeep models, it is most commonly associated with those equipped with electronic steering column adjustments.

Should I consult a professional mechanic for the B1D8B code?

If you are not experienced with automotive electrical systems, it is advisable to consult a professional mechanic to diagnose and repair the issue correctly.