AutoCodes – Jeep – B1D6E Jeep

B1D6E Jeep Code - Seat Horizontal Position Sensor Circuit High

Quick Answer

The seat track position sensor is a Hall Effect-type sensor. Common causes include Faulty Seat Horizontal Position Sensor, Seat Horizontal Position Sensor harness is open or shorted, Seat Horizontal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1D6E Jeep indicates Seat Horizontal Position Sensor Circuit High.
Common causes: Common causes include Faulty Seat Horizontal Position Sensor, Seat Horizontal Position Sensor harness is open or shorted, Seat Horizontal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 515

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 01, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1D6E Jeep Description

The seat track position sensor is a Hall Effect-type sensor. This sensor consists of a Hall Effect Integrated Circuit (IC) chip encased in potting material within a cavity of the molded plastic sensor housing. The seat track position sensor is designed to provide a seat position data input to the Occupant Classification Module (OCM) indicating whether the driver front seat is in a forward or rearward position. The OCM sends electronic seat position messages to the Occupant Restraint Controller (ORC) over the Controller Area Network (CAN) data bus. The ORC uses this data as an additional logic input for use in determining the appropriate deployment force to be used when deploying the multistage front airbags. The seat track position sensor cannot be adjusted or repaired and, if faulty or damaged, the entire sensor must be replaced. The Diagnostic Trouble Code (DTC) will set when the Memory Seat Module (MSMD) detects the switch engaged in an active position for over 50 seconds. If during motor operation the sensor voltage is not within a specified range this code will set. This DTC will only set when the seat switch is moved in the same direction three consecutive times.

OBDII Code B1D6E Jeep - Seat Horizontal Position Sensor Circuit High - AutoCodes.com — B1D6E Jeep Code - Seat Horizontal Position Sensor Circuit High

What does this mean?

What are the Possible Causes of the DTC B1D6E Jeep?

Faulty Seat Horizontal Position Sensor
Seat Horizontal Position Sensor harness is open or shorted
Seat Horizontal Position Sensor circuit poor electrical connection
Faulty Memory Seat Module (MSMD)

How to Fix the DTC B1D6E Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1D6E Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1D6E Jeep code?

Need more information on how to fix the B1D6E Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1D6E Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1D6E Jeep Code

1. What are the common symptoms of OBDII code B1D6E in a Jeep related to the Seat Horizontal Position Sensor Circuit High?

The common symptoms include an illuminated airbag warning light on the dashboard, non-functioning seat adjustments, and potential issues with airbag deployment.

2. What are the possible causes of OBDII code B1D6E in a Jeep for the Seat Horizontal Position Sensor Circuit High?

The code B1D6E can be triggered by a faulty seat horizontal position sensor, damaged wiring or connectors in the seat sensor circuit, or a malfunctioning airbag control module.

3. How can I diagnose the Seat Horizontal Position Sensor Circuit High issue in a Jeep with code B1D6E?

Diagnosis involves using a diagnostic scanner to read the fault code, checking the seat sensor wiring and connectors for any visible damage, and testing the sensor's resistance and signals to determine if it is functioning properly.

4. Can I still drive my Jeep with the B1D6E code related to the Seat Horizontal Position Sensor Circuit High?

While it may be possible to drive the vehicle with this code, it is recommended to address the issue promptly to ensure the airbag system functions correctly in case of an accident.

5. How can I repair the Seat Horizontal Position Sensor Circuit High problem in my Jeep causing the B1D6E code?

Repair options include replacing the faulty seat horizontal position sensor, repairing damaged wiring or connectors, or reprogramming the airbag control module if necessary.

6. Are there any safety concerns associated with the B1D6E code related to the Seat Horizontal Position Sensor Circuit High in a Jeep?

Yes, there are safety concerns as the airbag system may not function properly in the event of a collision if the issue is not addressed promptly.

7. Can resetting the OBDII codes clear the B1D6E code for the Seat Horizontal Position Sensor Circuit High in a Jeep?

Resetting the codes may temporarily clear the warning light, but the underlying issue causing the B1D6E code will persist until properly diagnosed and repaired.

8. How much does it typically cost to repair the Seat Horizontal Position Sensor Circuit High problem in a Jeep triggering the B1D6E code?

The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to a thousand dollars, including parts and labor.

9. Is it possible to prevent the recurrence of the B1D6E code related to the Seat Horizontal Position Sensor Circuit High in my Jeep?

Regular maintenance checks, avoiding physical damage to the seat sensor components, and addressing any related issues promptly can help prevent the recurrence of this OBDII code.

10. Will the B1D6E code for the Seat Horizontal Position Sensor Circuit High affect the overall performance of my Jeep?

While the code may not directly impact the vehicle's performance, it can affect the safety features related to the airbag system, making it crucial to address the issue for proper functionality.