AutoCodes – Chrysler – B1D6E Chrysler

B1D6E Chrysler Code - Seat Horizontal Position Sensor Circuit High

Quick Answer

The seat track position sensor is a Hall Effect-type sensor. Common causes include Faulty Seat Horizontal Position Sensor, Seat Horizontal Position Sensor harness is open or shorted, Seat Horizontal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1D6E Chrysler indicates Seat Horizontal Position Sensor Circuit High.
Common causes: Common causes include Faulty Seat Horizontal Position Sensor, Seat Horizontal Position Sensor harness is open or shorted, Seat Horizontal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 699

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 01, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1D6E Chrysler Description

The seat track position sensor is a Hall Effect-type sensor. This sensor consists of a Hall Effect Integrated Circuit (IC) chip encased in potting material within a cavity of the molded plastic sensor housing. The seat track position sensor is designed to provide a seat position data input to the Occupant Classification Module (OCM) indicating whether the driver front seat is in a forward or rearward position. The OCM sends electronic seat position messages to the Occupant Restraint Controller (ORC) over the Controller Area Network (CAN) data bus. The ORC uses this data as an additional logic input for use in determining the appropriate deployment force to be used when deploying the multistage front airbags. The seat track position sensor cannot be adjusted or repaired and, if faulty or damaged, the entire sensor must be replaced. The Diagnostic Trouble Code (DTC) will set when the Memory Seat Module (MSMD) detects the switch engaged in an active position for over 50 seconds. If during motor operation the sensor voltage is not within a specified range this code will set. This DTC will only set when the seat switch is moved in the same direction three consecutive times.

OBDII Code B1D6E Chrysler - Seat Horizontal Position Sensor Circuit High - AutoCodes.com — B1D6E Chrysler Code - Seat Horizontal Position Sensor Circuit High

What does this mean?

What are the Possible Causes of the DTC B1D6E Chrysler?

Faulty Seat Horizontal Position Sensor
Seat Horizontal Position Sensor harness is open or shorted
Seat Horizontal Position Sensor circuit poor electrical connection
Faulty Memory Seat Module (MSMD)

How to Fix the DTC B1D6E Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1D6E Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1D6E Chrysler code?

Need more information on how to fix the B1D6E Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1D6E Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1D6E Chrysler Code

1. What are the common symptoms of OBDII code B1D6E Chrysler (Seat Horizontal Position Sensor Circuit High)?

The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the seat position adjustment.

2. What can cause the OBDII code B1D6E Chrysler to trigger?

The code B1D6E Chrysler is typically triggered by a fault in the seat horizontal position sensor circuit, which can be caused by damaged wiring, a faulty sensor, or a poor connection.

3. How can I diagnose the issue related to the Seat Horizontal Position Sensor Circuit High code?

Diagnosing the issue involves using an OBDII scanner to retrieve the specific fault code, inspecting the wiring and connections related to the seat horizontal position sensor, and testing the sensor itself for proper functionality.

4. Is it safe to drive my vehicle with the B1D6E Chrysler fault code?

It is generally not recommended to drive the vehicle with an active airbag fault code, as it may affect the proper deployment of the airbags in the event of a collision. It is advisable to address the issue promptly.

5. Can I repair the Seat Horizontal Position Sensor Circuit High issue myself?

While some DIY enthusiasts may attempt to diagnose and repair the issue themselves, it is recommended to consult a professional mechanic or technician with experience in airbag systems to ensure proper diagnosis and repair.

6. What are the potential repair options for the B1D6E Chrysler fault code?

Repair options may include repairing or replacing damaged wiring, replacing the faulty seat horizontal position sensor, or addressing any poor connections in the circuit.

7. How much does it typically cost to fix the Seat Horizontal Position Sensor Circuit High issue?

The cost of repairing the B1D6E Chrysler fault code can vary depending on the cause of the issue, the extent of the repair needed, and labor costs. It is advisable to obtain quotes from different repair shops.

8. Can resetting the fault code clear the issue temporarily?

Resetting the fault code may temporarily clear the airbag warning light, but it will not fix the underlying issue causing the Seat Horizontal Position Sensor Circuit High fault code to trigger.

9. Are there any recalls or technical service bulletins related to the B1D6E Chrysler fault code?

It is advisable to check with Chrysler or authorized dealerships for any recalls or technical service bulletins related to the Seat Horizontal Position Sensor Circuit High issue, as they may offer solutions or repairs at no cost to the owner.

10. How important is it to address the B1D6E Chrysler fault code promptly?

It is crucial to address the B1D6E Chrysler fault code promptly to ensure the proper functioning of the airbag system in the vehicle and maintain safety in the event of a collision.