B1D4D RAM Code - Memory Switch Input Circuit Stuck
Quick Answer
The Diagnostic Trouble Code (DTC) sets when the Memory Select Switch Mux is under 2.6 volts for over 30 seconds. Common causes include Faulty Memory Set Switch, Memory Set Switch harness is open or shorted, Memory Set Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1D4D RAM indicates Memory Switch Input Circuit Stuck.
- Common causes
- Common causes include Faulty Memory Set Switch, Memory Set Switch harness is open or shorted, Memory Set Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1D4D RAM Description
What are the Possible Causes of the DTC B1D4D RAM?
- Faulty Memory Set Switch
- Memory Set Switch harness is open or shorted
- Memory Set Switch circuit poor electrical connection
- Faulty Door Module
How to Fix the DTC B1D4D RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1D4D RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1D4D RAM code?
Need more information on how to fix the B1D4D RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1D4D RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1D4D RAM Code
1. What does the OBDII code B1D4D mean?
The B1D4D code indicates a problem with the Memory Switch Input Circuit, specifically that it is stuck in an open or closed position.
2. What are the common symptoms of the B1D4D code?
Symptoms may include unresponsive memory seat settings, failure to save or recall seat positions, or a warning light on the dashboard.
3. What causes the B1D4D code to appear?
Common causes include a faulty memory switch, damaged wiring or connectors in the circuit, or a malfunctioning control module.
4. Can I still drive my vehicle with the B1D4D code active?
Yes, the vehicle is typically safe to drive, but the memory seat feature may not function correctly.
5. How do I diagnose the B1D4D code?
Start by inspecting the memory switch, wiring, and connectors for visible damage. Use a multimeter to test for continuity and proper voltage in the circuit.
6. How can I fix the B1D4D code?
Repairs may involve replacing the memory switch, repairing damaged wiring or connectors, or reprogramming or replacing the control module.
7. How much does it cost to repair the B1D4D code?
Repair costs vary depending on the issue but typically range from $100 to $300 for parts and labor.
8. Can a dead battery cause the B1D4D code?
A dead or weak battery is unlikely to directly cause this code, but voltage issues can sometimes affect electronic systems and trigger related faults.
9. Do I need to clear the B1D4D code after repairs?
Yes, use an OBDII scanner to clear the code after repairs. If the issue is resolved, the code should not reappear.
10. Is the B1D4D code specific to RAM vehicles?
Yes, the B1D4D code is specific to RAM vehicles and pertains to their memory switch input circuit system.
Discuss the causes and fixes for B1D4D RAM OBDII Code
Code B1D4D RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
