AutoCodesJeep – B1D23 Jeep

B1D23 Jeep Code - Mirror Horizontal Motor Control Circuit Low

Quick Answer

When the Memory Mirror Module senses a value below the tolerance of the mirror motor on the Mirror Horizontal Motor Driver circuit for over 10ms, this Diagnostic Trouble Code (DTC) will set. Common causes include Faulty Mirror Motor, Mirror Motor harness is open or shorted, Mirror Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1D23 Jeep indicates Mirror Horizontal Motor Control Circuit Low.
Common causes
Common causes include Faulty Mirror Motor, Mirror Motor harness is open or shorted, Mirror Motor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 518
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 28, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1D23 Jeep Description

When the Memory Mirror Module senses a value below the tolerance of the mirror motor on the Mirror Horizontal Motor Driver circuit for over 10ms, this Diagnostic Trouble Code (DTC) will set.
OBDII Code B1D23 Jeep - Mirror Horizontal Motor Control Circuit Low - AutoCodes.com
B1D23 Jeep Code - Mirror Horizontal Motor Control Circuit Low

What are the Possible Causes of the DTC B1D23 Jeep?

  • Faulty Mirror Motor
  • Mirror Motor harness is open or shorted
  • Mirror Motor circuit poor electrical connection
  • Faulty Memory Mirror Module

How to Fix the DTC B1D23 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1D23 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1D23 Jeep code?

Need more information on how to fix the B1D23 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1D23 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1D23 Jeep Code

1. What does the OBDII code B1D23 mean on a Jeep?

The code B1D23 indicates a problem with the mirror horizontal motor control circuit, specifically a low voltage condition.

2. What are the common symptoms of the B1D23 code?

Symptoms may include a side mirror that doesn't adjust horizontally, an inoperable mirror motor, or a stored trouble code in the vehicle’s control module.

3. What causes the B1D23 code to trigger?

Common causes include a faulty mirror motor, damaged wiring or connectors in the circuit, a blown fuse, or a malfunctioning door control module.

4. Can I still drive my Jeep with the B1D23 code active?

Yes, you can drive the vehicle with this code active, but the horizontal adjustment of the mirror may not function properly, which could impact visibility.

5. How do I diagnose the B1D23 code on my Jeep?

Start by inspecting the wiring and connectors for damage or corrosion, check the fuse for the mirror circuit, and test the mirror motor for proper operation.

6. How can I fix the B1D23 code?

Repairs may include replacing the mirror motor, repairing or replacing damaged wiring, cleaning corroded connectors, or replacing a faulty door control module.

7. Does the B1D23 code affect both mirrors on my Jeep?

No, this code typically affects only the mirror with the horizontal motor issue, usually on the side specified in the diagnostic scan.

8. How much does it cost to repair the B1D23 code?

Repair costs can vary but may range from $100 to $300, depending on whether the issue is with the motor, wiring, or control module.

9. Can I reset the B1D23 code without fixing the issue?

You can clear the code with an OBDII scanner, but it will likely return if the underlying issue isn’t resolved.

10. Is the B1D23 code common on all Jeep models?

This code can appear on various Jeep models, but it's not a widespread issue and often occurs due to specific wear or damage.

Discuss the causes and fixes for B1D23 Jeep OBDII Code

Code B1D23 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play