B1D19 Jeep Code - Passenger Mirror Horizontal Position Sensor Input Circuit High
Quick Answer
When the Passenger Door Module (PDM) senses greater than 4.8 volts on the Passenger Mirror Horizontal Position Signal Circuit for over 100Ms., this Diagnostic Trouble Code (DTC) will set. Common causes include Faulty Passenger Mirror, Passenger Mirror harness is open or shorted, Passenger Mirror circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1D19 Jeep indicates Passenger Mirror Horizontal Position Sensor Input Circuit High.
- Common causes
- Common causes include Faulty Passenger Mirror, Passenger Mirror harness is open or shorted, Passenger Mirror circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1D19 Jeep Description
What are the Possible Causes of the DTC B1D19 Jeep?
- Faulty Passenger Mirror
- Passenger Mirror harness is open or shorted
- Passenger Mirror circuit poor electrical connection
- Faulty Passenger Door Module (PDM)
How to Fix the DTC B1D19 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1D19 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1D19 Jeep code?
Need more information on how to fix the B1D19 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1D19 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1D19 Jeep Code
1. What are the common symptoms of OBDII code B1D19 Jeep (Passenger Mirror Horizontal Position Sensor Input Circuit High)?
The common symptoms include erratic or incorrect movement of the passenger side mirror, failure of the mirror to adjust properly, and possibly an illuminated malfunction indicator light.
2. What can cause OBDII code B1D19 Jeep to trigger?
This code is typically triggered by a fault in the passenger mirror horizontal position sensor circuit, such as a short to power or a faulty sensor.
3. How can I diagnose the cause of OBDII code B1D19 in my Jeep?
Diagnosing this code involves inspecting the wiring and connectors related to the passenger mirror horizontal position sensor, testing the sensor itself for proper function, and checking for any shorts or open circuits.
4. Can I still drive my Jeep with OBDII code B1D19 present?
While it may be possible to drive your Jeep with this code present, it is not recommended as it can affect the proper functioning of the passenger side mirror, which is an essential safety feature.
5. How can I repair OBDII code B1D19 in my Jeep?
Repairing this code involves fixing the underlying issue causing the high input circuit, which may include repairing or replacing damaged wiring, connectors, or the horizontal position sensor itself.
6. Is it safe to manually adjust the passenger side mirror if OBDII code B1D19 is triggered?
It is not recommended to manually adjust the mirror if this code is present, as it may further damage the sensor or exacerbate the issue. It's best to address the root cause of the problem first.
7. Can extreme weather conditions cause OBDII code B1D19 in a Jeep?
Extreme weather conditions such as heavy rain or snow could potentially cause water damage to the sensor or wiring, leading to a high input circuit fault and triggering the B1D19 code.
8. How long does it typically take to repair OBDII code B1D19 in a Jeep?
The time it takes to repair this code can vary depending on the exact cause of the issue and the availability of replacement parts. In general, it may take a few hours to a day to diagnose and fix the problem.
9. Will resetting the OBDII system clear the B1D19 code in my Jeep?
Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the high input circuit fault is not addressed, the code is likely to reappear after driving the vehicle.
10. Can I prevent OBDII code B1D19 from occurring in the future?
Regularly inspecting and maintaining the passenger mirror horizontal position sensor and associated wiring can help prevent the occurrence of this code. Addressing any issues promptly can also help avoid triggering the B1D19 fault code.
Discuss the causes and fixes for B1D19 Jeep OBDII Code
Code B1D19 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
