B1D12 Jeep Code - Passenger Mirror Position Sensor Power Supply Circuit Low
Quick Answer
When the Passenger Door Module (PDM) senses voltage below 4.3 volts on the Passenger Mirror Position Sensor Supply Circuit for over 30 ms., this Diagnostic Trouble Code (DTC) will set. Common causes include Faulty Passenger Mirror, Passenger Mirror harness is open or shorted, Passenger Mirror circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1D12 Jeep indicates Passenger Mirror Position Sensor Power Supply Circuit Low.
- Common causes
- Common causes include Faulty Passenger Mirror, Passenger Mirror harness is open or shorted, Passenger Mirror circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1D12 Jeep Description
What are the Possible Causes of the DTC B1D12 Jeep?
- Faulty Passenger Mirror
- Passenger Mirror harness is open or shorted
- Passenger Mirror circuit poor electrical connection
- Faulty Passenger Door Module (PDM)
How to Fix the DTC B1D12 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1D12 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1D12 Jeep code?
Need more information on how to fix the B1D12 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1D12 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1D12 Jeep Code
1. What are the common symptoms of OBDII code B1D12 in a Jeep related to the Passenger Mirror Position Sensor Power Supply Circuit Low?
- Common symptoms include erratic movement or failure of the passenger side mirror, loss of power mirror adjustment functionality, and potential warning lights on the dashboard.
2. What are some possible causes of the B1D12 code in a Jeep?
- Possible causes may include a damaged mirror position sensor, faulty wiring or connectors in the power supply circuit, or a malfunctioning mirror control module.
3. How can I diagnose the B1D12 code in my Jeep?
- Diagnosis typically involves using an OBDII scanner to retrieve the specific code, visually inspecting the mirror and its components for damage, and testing the power supply circuit for continuity and proper voltage.
4. Can I drive my Jeep with the B1D12 code present?
- It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to ensure proper functioning of the passenger side mirror.
5. What is the typical repair process for resolving the B1D12 code in a Jeep?
- The repair process may involve replacing the passenger mirror position sensor, repairing or replacing damaged wiring or connectors, or addressing any issues in the mirror control module.
6. Are there any DIY tips for fixing the B1D12 code in a Jeep?
- DIY enthusiasts with automotive repair experience may attempt to inspect and replace the mirror position sensor or address wiring issues, but consulting a professional technician is recommended for accurate diagnosis and repair.
7. Will resetting the OBDII code clear the B1D12 fault in my Jeep?
- Resetting the code may temporarily clear the fault, but if the underlying issue causing the B1D12 code is not resolved, it is likely to reappear after driving the vehicle again.
8. Can extreme weather conditions affect the occurrence of the B1D12 code in a Jeep?
- Extreme weather conditions, such as excessive heat or moisture, can potentially impact the electrical components related to the mirror position sensor, leading to the triggering of the B1D12 code.
9. How much does it typically cost to repair the B1D12 code in a Jeep at a dealership or a repair shop?
- The cost of repairing the B1D12 code can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. Is the B1D12 code specific to Jeep vehicles, or can it occur in other car brands as well?
- While the B1D12 code is specific to Jeep vehicles, similar codes related to mirror position sensors and power supply circuits may be present in other car brands, each with their unique OBDII designations.
Discuss the causes and fixes for B1D12 Jeep OBDII Code
Code B1D12 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
