AutoCodesRAM – B1D0F RAM

B1D0F RAM Code - Driver Mirror Horizontal Position Sensor Input Circuit Low

Quick Answer

When the Driver Door Module (DDM) senses less than 0.16 volts on the Driver Mirror Horizontal Position Signal circuit for over 100ms., this code will set. Common causes include Faulty Driver Mirror, Driver Mirror harness is open or shorted, Driver Mirror circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1D0F RAM indicates Driver Mirror Horizontal Position Sensor Input Circuit Low.
Common causes
Common causes include Faulty Driver Mirror, Driver Mirror harness is open or shorted, Driver Mirror circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 552
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 26, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1D0F RAM Description

When the Driver Door Module (DDM) senses less than 0.16 volts on the Driver Mirror Horizontal Position Signal circuit for over 100ms., this code will set.
OBDII Code B1D0F RAM - Driver Mirror Horizontal Position Sensor Input Circuit Low - AutoCodes.com
B1D0F RAM Code - Driver Mirror Horizontal Position Sensor Input Circuit Low

What are the Possible Causes of the DTC B1D0F RAM?

  • Faulty Driver Mirror
  • Driver Mirror harness is open or shorted
  • Driver Mirror circuit poor electrical connection
  • Faulty Driver Door Module (DDM)

How to Fix the DTC B1D0F RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1D0F RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1D0F RAM code?

Need more information on how to fix the B1D0F RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1D0F RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1D0F RAM Code

1. What does the OBDII code B1D0F mean?

The B1D0F code indicates an issue with the driver mirror's horizontal position sensor input circuit, specifically a low voltage condition.

2. What are the common symptoms of code B1D0F?

Common symptoms include the driver-side mirror not adjusting horizontally, limited or no response to mirror control inputs, and potential illumination of the check engine or related warning lights.

3. What causes the B1D0F code to be triggered?

The code can be triggered by a faulty driver mirror position sensor, damaged wiring or connectors, or a malfunctioning mirror control module.

4. Can I still drive my car with the B1D0F code?

Yes, the vehicle can still be driven, but the driver mirror’s adjustability may be impaired, which could affect visibility and safety.

5. How do I diagnose the B1D0F code?

Start by inspecting the wiring and connectors for damage or corrosion, then test the mirror position sensor and control module for proper operation using a multimeter or diagnostic tool.

6. What repairs are needed to fix the B1D0F code?

Repairs may include replacing the driver mirror position sensor, repairing damaged wiring, or replacing the mirror control module if it’s defective.

7. How can I prevent the B1D0F code from occurring?

Regular inspection and maintenance of the mirror wiring and connectors can help prevent issues leading to this code.

8. Is the B1D0F code specific to certain vehicles?

This code is specific to RAM vehicles and pertains to the driver-side mirror horizontal position sensor circuit.

9. How much does it cost to repair the B1D0F code?

Repair costs can vary but typically range from $100 to $300, depending on whether the position sensor, wiring, or mirror control module needs replacement.

10. Can a faulty mirror control switch cause the B1D0F code?

Yes, a malfunctioning mirror control switch could also contribute to the issue by sending incorrect signals to the mirror position sensor.

Discuss the causes and fixes for B1D0F RAM OBDII Code

Code B1D0F RAM comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play