B1CC2 RAM Code - Deployment Notification Output Circuit High
Quick Answer
The OBDII code sets when the Multi-Purpose Module (Police And Taxi Interface Module (PTIM)) has detected the Front or Side Airbag Status Signal circuits above a calibrated value. Common causes include Faulty Front/Side Air Bag, Front/Side Air Bag harness is open or shorted, Front/Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1CC2 RAM indicates Deployment Notification Output Circuit High.
- Common causes
- Common causes include Faulty Front/Side Air Bag, Front/Side Air Bag harness is open or shorted, Front/Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1CC2 RAM Description
What are the Possible Causes of the DTC B1CC2 RAM?
- Faulty Front/Side Air Bag
- Front/Side Air Bag harness is open or shorted
- Front/Side Air Bag circuit poor electrical connection
- Faulty Aftermarket Light/Siren Controller
- Faulty Multi-Purpose Module (Police And Taxi Interface Module (PTIM))
How to Fix the DTC B1CC2 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1CC2 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1CC2 RAM code?
Need more information on how to fix the B1CC2 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1CC2 RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1CC2 RAM Code
1. What does the OBDII code B1CC2 mean?
B1CC2 refers to a "Deployment Notification Output Circuit High" issue, which indicates that the airbag system has detected a high voltage condition in the deployment notification circuit.
2. What are the common symptoms of code B1CC2?
Symptoms include an illuminated airbag warning light, potential issues with the airbag system functionality, and possible failure of the deployment notification circuit.
3. What causes the B1CC2 code to appear?
Common causes include damaged or corroded wiring in the deployment notification circuit, a malfunctioning airbag control module, or a faulty deployment notification output component.
4. Can I drive my vehicle with the B1CC2 code active?
You can drive the vehicle, but it is not safe since the airbag system may not function properly in the event of an accident.
5. How is the B1CC2 code diagnosed?
A technician will use a scan tool to confirm the code, inspect the wiring and connectors in the deployment notification circuit, and test the airbag module for faults.
6. What repairs are needed to fix the B1CC2 code?
Repairs may include replacing damaged wiring or connectors, repairing corroded circuit components, or replacing a faulty airbag control module.
7. How much does it typically cost to fix the B1CC2 code?
Repair costs vary, but they typically range from $100 to $600, depending on the specific issue and whether the airbag control module requires replacement.
8. Will resetting the code fix the B1CC2 issue?
Simply clearing the code will not fix the problem. The underlying cause must be addressed to prevent the code from returning.
9. Can a faulty battery cause the B1CC2 code?
Yes, a weak or failing battery can sometimes lead to voltage irregularities, which may trigger this code.
10. Is the B1CC2 code related to a recall?
It's possible, depending on your vehicle’s make and model. Check with your dealer or manufacturer for any open recalls related to the airbag system.
Discuss the causes and fixes for B1CC2 RAM OBDII Code
Code B1CC2 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
