AutoCodes – RAM – B1CC1 RAM

B1CC1 RAM Code - Deployment Notification Output Circuit Low

Quick Answer

The OBDII code sets when the Multi-Purpose Module (Police And Taxi Interface Module (PTIM)) has detected the Front or Side Airbag Status Signal circuits below a calibrated value. Common causes include Faulty Front/Side Air Bag, Front/Side Air Bag harness is open or shorted, Front/Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1CC1 RAM indicates Deployment Notification Output Circuit Low.
Common causes: Common causes include Faulty Front/Side Air Bag, Front/Side Air Bag harness is open or shorted, Front/Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 663

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1CC1 RAM Description

The OBDII code sets when the Multi-Purpose Module (Police And Taxi Interface Module (PTIM)) has detected the Front or Side Airbag Status Signal circuits below a calibrated value.

OBDII Code B1CC1 RAM - Deployment Notification Output Circuit Low - AutoCodes.com — B1CC1 RAM Code - Deployment Notification Output Circuit Low

What does this mean?

What are the Possible Causes of the DTC B1CC1 RAM?

Faulty Front/Side Air Bag
Front/Side Air Bag harness is open or shorted
Front/Side Air Bag circuit poor electrical connection
Faulty Aftermarket Light/Siren Controller
Faulty Multi-Purpose Module (Police And Taxi Interface Module (PTIM))

How to Fix the DTC B1CC1 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1CC1 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1CC1 RAM code?

Need more information on how to fix the B1CC1 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1CC1 RAM code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1CC1 RAM Code

1. What are the common symptoms of OBDII code B1CC1 RAM titled Deployment Notification Output Circuit Low?

The common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system.

2. What are the possible causes of OBDII code B1CC1 RAM Deployment Notification Output Circuit Low?

Possible causes include damaged wiring or connectors in the airbag system, a faulty airbag control module, or a problem with the deployment notification output circuit.

3. How can I diagnose the OBDII code B1CC1 RAM Deployment Notification Output Circuit Low?

Diagnosing this code typically involves using a diagnostic scanner to retrieve the specific fault codes, inspecting the airbag system wiring and connectors for damage, and testing the deployment notification output circuit.

4. Can I continue driving my vehicle with the OBDII code B1CC1 RAM Deployment Notification Output Circuit Low?

It is not recommended to drive your vehicle with this code present, as it indicates a potential issue with the airbag system, which is a critical safety feature.

5. How can I repair OBDII code B1CC1 RAM Deployment Notification Output Circuit Low?

Repairing this code may involve repairing or replacing damaged wiring or connectors in the airbag system, replacing the airbag control module if faulty, or addressing issues with the deployment notification output circuit.

6. Is it safe to reset the OBDII code B1CC1 RAM Deployment Notification Output Circuit Low without fixing the underlying issue?

Resetting the code without addressing the underlying problem can temporarily turn off the warning light, but the issue will likely reoccur, and the airbag system may not function properly in the event of an accident.

7. Will OBDII code B1CC1 RAM Deployment Notification Output Circuit Low cause the airbags to deploy unexpectedly?

This code typically does not cause the airbags to deploy unexpectedly; however, it indicates a potential problem with the airbag system that should be addressed promptly.

8. How much does it cost to repair OBDII code B1CC1 RAM Deployment Notification Output Circuit Low?

The cost of repair can vary depending on the specific cause of the code, the extent of the damage, and the labor rates of the repair shop. It is recommended to get a professional diagnosis for an accurate estimate.

9. Can OBDII code B1CC1 RAM Deployment Notification Output Circuit Low be triggered by a weak car battery?

A weak car battery can potentially cause electrical issues that may lead to the triggering of this code. It is advisable to ensure that the car battery is in good condition as part of troubleshooting.

10. How long does it take to repair OBDII code B1CC1 RAM Deployment Notification Output Circuit Low?

The repair time can vary depending on the complexity of the underlying issue and the availability of parts. Some repairs may be completed in a few hours, while others may require more time for diagnosis and replacement.