AutoCodes – Dodge – B1CC1 Dodge

B1CC1 Dodge Code - Deployment Notification Output Circuit Low

Quick Answer

The OBDII code sets when the Multi-Purpose Module (Police And Taxi Interface Module (PTIM)) has detected the Front or Side Airbag Status Signal circuits below a calibrated value. Common causes include Faulty Front/Side Air Bag, Front/Side Air Bag harness is open or shorted, Front/Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1CC1 Dodge indicates Deployment Notification Output Circuit Low.
Common causes: Common causes include Faulty Front/Side Air Bag, Front/Side Air Bag harness is open or shorted, Front/Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 599

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1CC1 Dodge Description

The OBDII code sets when the Multi-Purpose Module (Police And Taxi Interface Module (PTIM)) has detected the Front or Side Airbag Status Signal circuits below a calibrated value.

OBDII Code B1CC1 Dodge - Deployment Notification Output Circuit Low - AutoCodes.com — B1CC1 Dodge Code - Deployment Notification Output Circuit Low

What does this mean?

What are the Possible Causes of the DTC B1CC1 Dodge?

Faulty Front/Side Air Bag
Front/Side Air Bag harness is open or shorted
Front/Side Air Bag circuit poor electrical connection
Faulty Aftermarket Light/Siren Controller
Faulty Multi-Purpose Module (Police And Taxi Interface Module (PTIM))

How to Fix the DTC B1CC1 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1CC1 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1CC1 Dodge code?

Need more information on how to fix the B1CC1 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1CC1 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1CC1 Dodge Code

1. What are the common symptoms of OBDII code B1CC1 in a Dodge related to Deployment Notification Output Circuit Low?

The common symptoms include the airbag warning light being illuminated on the dashboard and potential issues with the vehicle's airbag system.

2. What are the possible causes of OBDII code B1CC1 Deployment Notification Output Circuit Low in a Dodge?

Common causes of this code may include a faulty airbag control module, damaged wiring or connectors in the airbag system, or a malfunctioning airbag deployment notification output circuit.

3. How serious is OBDII code B1CC1 in a Dodge?

This code indicates a potential issue with the airbag system, which is a critical safety component in the vehicle. It is important to address this issue promptly to ensure the proper functioning of the airbags in the event of a collision.

4. Can I continue driving my Dodge with OBDII code B1CC1 Deployment Notification Output Circuit Low?

It is not recommended to drive the vehicle with this code present, as it signifies a problem with the airbag system. Driving with a malfunctioning airbag system can compromise your safety in the event of an accident.

5. How can I diagnose OBDII code B1CC1 in my Dodge?

Diagnosing this code typically involves using a diagnostic scanner to retrieve the specific fault code, conducting a visual inspection of the airbag system components, and testing the airbag deployment notification output circuit for continuity and proper function.

6. What are some repair tips for addressing OBDII code B1CC1 in a Dodge?

Repair tips may include checking and repairing any damaged wiring or connectors in the airbag system, replacing the airbag control module if necessary, and ensuring all airbag components are properly connected and functioning.

7. Can I reset OBDII code B1CC1 in my Dodge after making repairs?

After addressing the underlying issue causing the code, you can reset the code using a diagnostic scanner. However, it is important to ensure that the repair has been successful and that the code does not reappear.

8. How much does it cost to repair OBDII code B1CC1 in a Dodge?

The cost of repairs can vary depending on the specific cause of the code and the extent of the repairs needed. It is recommended to consult a professional mechanic for a proper diagnosis and cost estimate.

9. Is OBDII code B1CC1 specific to Dodge vehicles only?

While the specific code designation may vary between vehicle manufacturers, the underlying issue related to Deployment Notification Output Circuit Low in the airbag system is common across different makes and models.

10. How can I prevent OBDII code B1CC1 from appearing in my Dodge in the future?

Regular maintenance of the airbag system, including checking for any signs of wear or damage, can help prevent issues that may trigger this code. Additionally, prompt attention to any warning lights related to the airbag system can help avoid potential safety risks.