AutoCodes – Chrysler – B1CC1 Chrysler

B1CC1 Chrysler Code - Deployment Notification Output Circuit Low

Quick Answer

The OBDII code sets when the Multi-Purpose Module (Police And Taxi Interface Module (PTIM)) has detected the Front or Side Airbag Status Signal circuits below a calibrated value. Common causes include Faulty Front/Side Air Bag, Front/Side Air Bag harness is open or shorted, Front/Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1CC1 Chrysler indicates Deployment Notification Output Circuit Low.
Common causes: Common causes include Faulty Front/Side Air Bag, Front/Side Air Bag harness is open or shorted, Front/Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 862

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1CC1 Chrysler Description

The OBDII code sets when the Multi-Purpose Module (Police And Taxi Interface Module (PTIM)) has detected the Front or Side Airbag Status Signal circuits below a calibrated value.

OBDII Code B1CC1 Chrysler - Deployment Notification Output Circuit Low - AutoCodes.com — B1CC1 Chrysler Code - Deployment Notification Output Circuit Low

What does this mean?

What are the Possible Causes of the DTC B1CC1 Chrysler?

Faulty Front/Side Air Bag
Front/Side Air Bag harness is open or shorted
Front/Side Air Bag circuit poor electrical connection
Faulty Aftermarket Light/Siren Controller
Faulty Multi-Purpose Module (Police And Taxi Interface Module (PTIM))

How to Fix the DTC B1CC1 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1CC1 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1CC1 Chrysler code?

Need more information on how to fix the B1CC1 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1CC1 Chrysler code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1CC1 Chrysler Code

1. What are the common symptoms of OBDII code B1CC1 Chrysler - Deployment Notification Output Circuit Low?

The common symptoms include the airbag warning light illuminated on the dashboard, non-functioning airbags, and potential issues with the vehicle's safety systems.

2. What could cause the OBDII code B1CC1 Chrysler to trigger?

This code is typically triggered by a malfunction in the deployment notification output circuit, which can be caused by wiring issues, a faulty airbag control module, or a blown fuse.

3. How serious is the OBDII code B1CC1 Chrysler - Deployment Notification Output Circuit Low?

This code is considered serious as it indicates a problem with the vehicle's airbag system, which is a critical safety feature. It is recommended to address this issue promptly to ensure the airbags deploy correctly in case of an accident.

4. Can I continue driving with the OBDII code B1CC1 Chrysler active?

It is not recommended to drive with this code active, as it indicates a potential issue with the airbag system. Driving with faulty airbags can compromise the safety of both the driver and passengers in the event of a collision.

5. How can I diagnose and repair the OBDII code B1CC1 Chrysler - Deployment Notification Output Circuit Low?

Diagnosis typically involves inspecting the wiring, connectors, and components related to the airbag system. Repair may involve fixing wiring issues, replacing the airbag control module, or addressing any blown fuses.

6. Will resetting the OBDII code B1CC1 Chrysler make it go away permanently?

Simply resetting the code may temporarily turn off the warning light, but the underlying issue causing the code will remain. It is crucial to diagnose and address the root cause to prevent the code from reoccurring.

7. Can I fix the OBDII code B1CC1 Chrysler issue myself, or do I need a professional mechanic?

While some DIY enthusiasts may attempt to diagnose and repair this code, dealing with the airbag system requires specialized knowledge and tools. It is recommended to consult a professional mechanic for proper diagnosis and repair.

8. Are there any safety precautions I should take when working on the OBDII code B1CC1 Chrysler issue?

When working on the airbag system related to this code, it is essential to disconnect the vehicle's battery and wait for a specific period to discharge any stored energy. This precaution helps prevent accidental airbag deployment.

9. How much can I expect to spend on repairing the OBDII code B1CC1 Chrysler issue?

The cost of repairing this code can vary depending on the underlying cause and the labor rates in your area. It is advisable to get estimates from reputable mechanics or dealerships to determine the exact cost.

10. Will fixing the OBDII code B1CC1 Chrysler affect my vehicle's warranty?

If your vehicle is still under warranty, it is recommended to have the issue addressed by an authorized dealership or repair center to avoid voiding any warranty coverage. Be sure to check with your warranty provider for specific details.