B1C4D Code - 1st Row Passenger Seat Belt Buckle Tensioner Circuit High
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty 1st Row Passenger Seat Belt Buckle Tensioner, 1st Row Passenger Seat Belt Buckle Tensioner harness is open or shorted, 1st Row Passenger Seat Belt Buckle Tensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1C4D indicates 1st Row Passenger Seat Belt Buckle Tensioner Circuit High.
- Common causes
- Common causes include Faulty 1st Row Passenger Seat Belt Buckle Tensioner, 1st Row Passenger Seat Belt Buckle Tensioner harness is open or shorted, 1st Row Passenger Seat Belt Buckle Tensioner circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1C4D Description
What are the Possible Causes of the DTC B1C4D?
- Faulty 1st Row Passenger Seat Belt Buckle Tensioner
- 1st Row Passenger Seat Belt Buckle Tensioner harness is open or shorted
- 1st Row Passenger Seat Belt Buckle Tensioner circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1C4D?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1C4D code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1C4D code?
Need more information on how to fix the B1C4D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1C4D code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1C4D Chrysler — 1st Row Passenger Seat Belt Buckle Tensioner Circuit High
- B1C4D Dodge — 1st Row Passenger Seat Belt Buckle Tensioner Circuit High
- B1C4D Jeep — 1st Row Passenger Seat Belt Buckle Tensioner Circuit High
- B1C4D Mitsubishi — 1st Row Passenger Seat Belt Buckle Tensioner Circuit High
- B1C4D RAM — 1st Row Passenger Seat Belt Buckle Tensioner Circuit High
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1C4D Code
1. What does the OBDII code B1C4D mean?
B1C4D indicates an issue with the 1st row passenger seat belt buckle tensioner circuit, specifically that the circuit has a high resistance or voltage level.
2. What are the common symptoms of the B1C4D code?
Common symptoms include the airbag warning light being illuminated, a malfunctioning passenger seat belt tensioner, or the seat belt not tightening properly during an impact.
3. What causes the B1C4D code to appear?
Possible causes include a damaged seat belt tensioner, corroded or loose electrical connections, broken wiring in the tensioner circuit, or a faulty control module.
4. Is it safe to drive with the B1C4D code active?
It’s not recommended to drive with this code active, as it may indicate that the passenger seat belt tensioner is not working properly, reducing safety in the event of an accident.
5. How can I diagnose the B1C4D code?
Diagnosis involves scanning for codes, visually inspecting the seat belt tensioner and its wiring, checking for loose or corroded connections, and testing the resistance of the circuit with a multimeter.
6. Can I fix the B1C4D code myself?
If you have experience with vehicle electronics, you may be able to repair loose connections, replace damaged wiring, or install a new tensioner. However, complex issues may require professional assistance.
7. How much does it cost to repair the B1C4D code?
Repair costs vary depending on the issue. Replacing a seat belt tensioner can cost $200–$300, while fixing wiring or connections may be less expensive.
8. Can the B1C4D code be cleared without repairs?
Clearing the code without addressing the underlying issue will only temporarily turn off the warning light. The code will likely reappear until the problem is resolved.
9. What tools are needed to troubleshoot the B1C4D code?
You’ll need an OBDII scanner, a multimeter to test electrical resistance, and basic hand tools for inspecting and repairing connections or components.
10. What happens if the B1C4D code is ignored?
Ignoring this code could compromise passenger safety, as the seat belt tensioner may not function properly in an accident, increasing the risk of injury.
Discuss the causes and fixes for B1C4D OBDII Code
Code B1C4D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
