B1C48 Jeep Code - 1st Row Passenger Retractor Tensioner Circuit High
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty 1st Row Passenger Retractor Tensioner, 1st Row Passenger Retractor Tensioner harness is open or shorted, 1st Row Passenger Retractor Tensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1C48 Jeep indicates 1st Row Passenger Retractor Tensioner Circuit High.
- Common causes
- Common causes include Faulty 1st Row Passenger Retractor Tensioner, 1st Row Passenger Retractor Tensioner harness is open or shorted, 1st Row Passenger Retractor Tensioner circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1C48 Jeep Description
What are the Possible Causes of the DTC B1C48 Jeep?
- Faulty 1st Row Passenger Retractor Tensioner
- 1st Row Passenger Retractor Tensioner harness is open or shorted
- 1st Row Passenger Retractor Tensioner circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1C48 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1C48 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1C48 Jeep code?
Need more information on how to fix the B1C48 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1C48 Jeep code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1C48 Jeep Code
What does the OBDII code B1C48 mean for my Jeep?
The code B1C48 indicates a problem with the first-row passenger seat belt retractor tensioner circuit, specifically that the circuit is experiencing high voltage or resistance issues.
What are the common symptoms associated with the B1C48 code?
Common symptoms include a warning light on the dashboard, seat belt warning chimes, or the passenger seat belt not functioning properly.
What could cause the B1C48 code to trigger?
Possible causes include a faulty seat belt retractor, damaged wiring or connectors in the tensioner circuit, or a malfunctioning airbag control module.
How can I diagnose the issue related to code B1C48?
To diagnose the issue, inspect the wiring and connectors for damage, test the seat belt retractor for proper resistance, and use a scan tool to check for additional codes that may provide further clues.
What repairs are often needed to fix the B1C48 code?
Repairs may involve replacing the seat belt retractor assembly, repairing damaged wiring, or replacing the airbag control module if it is found to be faulty.
Is it safe to drive my Jeep with the B1C48 code active?
It is not recommended to drive with this code active, as it may affect the proper functioning of the airbag system and passenger safety features.
Can I clear the B1C48 code myself, and will it come back?
You can clear the code using an OBDII scanner, but if the underlying issue is not fixed, the code will likely return.
How much does it typically cost to repair the issue related to code B1C48?
Repair costs can vary widely depending on the specific issue but may range from $100 for minor wiring repairs to over $500 for a complete seat belt retractor replacement.
Will the B1C48 code affect my vehicle’s emissions?
No, the B1C48 code is related to the safety system and does not impact the vehicle's emissions system.
Discuss the causes and fixes for B1C48 Jeep OBDII Code
Code B1C48 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
