AutoCodes – RAM – B1C2C RAM

B1C2C RAM Code - Right Side Seat Thorax Squib 1 High

Quick Answer

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1C2C RAM indicates Right Side Seat Thorax Squib 1 High.
Common causes: Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 508

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1C2C RAM Description

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a floating configuration at the module (connected to neither power nor ground) as protection against inadvertent deployment. The use of the Supplemental Restraint System (SRS) Load Tool provides a test point as well as a method for opening the shorting bar connections within the harness connector. The ORC sends out a 40 mA diagnostic current on each squib voltage supply circuit at power up and every 500 ms thereafter while the ignition is in on.

OBDII Code B1C2C RAM - Right Side Seat Thorax Squib 1 High - AutoCodes.com — B1C2C RAM Code - Right Side Seat Thorax Squib 1 High

What does this mean?

What are the Possible Causes of the DTC B1C2C RAM?

Faulty Right Thorax Side Air Bag
Right Thorax Side Air Bag harness is open or shorted
Right Thorax Side Air Bag circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1C2C RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1C2C RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1C2C RAM code?

Need more information on how to fix the B1C2C RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1C2C RAM code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1C2C RAM Code

1. What are the common symptoms of OBDII code B1C2C RAM related to the Right Side Seat Thorax Squib 1 High?

- Common symptoms may include the airbag warning light illuminating on the dashboard and potential issues with the right side seat airbag system.

2. What are the possible causes of OBDII code B1C2C RAM indicating Right Side Seat Thorax Squib 1 High?

- Possible causes include a faulty seat airbag squib, wiring issues, a disconnected connector, or a problem with the airbag control module.

3. How can I diagnose the OBDII code B1C2C RAM associated with the Right Side Seat Thorax Squib 1 High?

- A thorough inspection of the right side seat airbag system, including checking for damaged wiring, loose connections, and testing the seat squib with a multimeter, can help diagnose the issue.

4. Is it safe to drive with the OBDII code B1C2C RAM indicating Right Side Seat Thorax Squib 1 High?

- It is not recommended to drive the vehicle with an active airbag fault code, as it may compromise the effectiveness of the airbag system in the event of a collision.

5. What are some repair tips for addressing OBDII code B1C2C RAM related to the Right Side Seat Thorax Squib 1 High?

- Repair tips may include repairing or replacing damaged wiring, ensuring all connectors are securely attached, and replacing the faulty seat airbag squib if necessary.

6. Can I reset the OBDII code B1C2C RAM associated with the Right Side Seat Thorax Squib 1 High on my own?

- While you can clear the code with an OBDII scanner, it is important to address the underlying issue causing the fault code to prevent it from recurring.

7. How much does it typically cost to repair OBDII code B1C2C RAM related to the Right Side Seat Thorax Squib 1 High?

- The cost of repair can vary depending on the specific cause of the issue, but it may involve expenses for parts, labor, and diagnostic services at a repair shop or dealership.

8. Are there any safety precautions to consider when working on the right side seat airbag system for OBDII code B1C2C RAM?

- It is crucial to disconnect the vehicle's battery and wait for the airbag system to fully discharge before attempting any repairs to avoid accidental deployment and potential injuries.

9. Can a DIY enthusiast with automotive experience fix OBDII code B1C2C RAM associated with the Right Side Seat Thorax Squib 1 High?

- While some tasks, such as checking connections or replacing components, may be within reach for experienced individuals, diagnosing and repairing airbag system issues often require specialized knowledge and tools.

10. How often should I have the right side seat airbag system inspected to prevent OBDII code B1C2C RAM occurrences?

- Regular maintenance and inspections, especially after any accidents or electrical work, can help identify potential issues early and prevent faults like B1C2C RAM related to the Right Side Seat Thorax Squib 1 High.