AutoCodes – Jeep – B1C2C Jeep

B1C2C Jeep Code - Right Side Seat Thorax Squib 1 High

Quick Answer

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1C2C Jeep indicates Right Side Seat Thorax Squib 1 High.
Common causes: Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 614

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1C2C Jeep Description

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a floating configuration at the module (connected to neither power nor ground) as protection against inadvertent deployment. The use of the Supplemental Restraint System (SRS) Load Tool provides a test point as well as a method for opening the shorting bar connections within the harness connector. The ORC sends out a 40 mA diagnostic current on each squib voltage supply circuit at power up and every 500 ms thereafter while the ignition is in on.

OBDII Code B1C2C Jeep - Right Side Seat Thorax Squib 1 High - AutoCodes.com — B1C2C Jeep Code - Right Side Seat Thorax Squib 1 High

What does this mean?

What are the Possible Causes of the DTC B1C2C Jeep?

Faulty Right Thorax Side Air Bag
Right Thorax Side Air Bag harness is open or shorted
Right Thorax Side Air Bag circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1C2C Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1C2C Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1C2C Jeep code?

Need more information on how to fix the B1C2C Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1C2C Jeep code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1C2C Jeep Code

What are the common symptoms of OBDII code B1C2C in a Jeep related to the Right Side Seat Thorax Squib 1 High?

Common symptoms include the airbag warning light illuminating on the dashboard, potential non-deployment of the side airbag in case of an accident, and diagnostic trouble codes indicating an issue with the right side seat thorax squib.

What are some possible causes of OBDII code B1C2C in a Jeep related to the Right Side Seat Thorax Squib 1 High?

Potential causes include a faulty right side seat thorax squib, wiring or connector issues in the airbag system, a blown fuse, or a problem with the airbag control module.

How can I diagnose the OBDII code B1C2C in a Jeep related to the Right Side Seat Thorax Squib 1 High?

Diagnosis typically involves using an OBDII scanner to retrieve the specific trouble code, inspecting the right side seat thorax squib and its connections for any visible damage, checking related fuses, and conducting a thorough inspection of the airbag system wiring.

What are some repair tips for addressing OBDII code B1C2C in a Jeep related to the Right Side Seat Thorax Squib 1 High?

Repair tips may include replacing the faulty right side seat thorax squib, repairing any damaged wiring or connectors, resetting the airbag system, and ensuring all components are properly installed and functioning correctly.

Is it safe to drive my Jeep with OBDII code B1C2C related to the Right Side Seat Thorax Squib 1 High?

It is not recommended to drive the vehicle with an active airbag fault code, as it can compromise the effectiveness of the airbag system in the event of an accident. It is best to address the issue promptly to ensure the safety features are fully operational.

Can I reset the OBDII code B1C2C related to the Right Side Seat Thorax Squib 1 High in my Jeep without repairs?

While you can clear the trouble code with an OBDII scanner, it is crucial to diagnose and address the underlying issue causing the fault code. Resetting the code without proper repairs may lead to the problem recurring and potentially compromising safety.

How much does it typically cost to repair OBDII code B1C2C in a Jeep related to the Right Side Seat Thorax Squib 1 High?

The cost of repairs can vary depending on the specific cause of the issue, the need for replacement parts, and labor costs. It is advisable to consult a professional mechanic or dealership for an accurate diagnosis and cost estimate.

What should I do if the OBDII code B1C2C related to the Right Side Seat Thorax Squib 1 High keeps coming back after repairs?

If the trouble code persists after repairs, it may indicate an ongoing issue with the airbag system. It is essential to recheck the components, wiring, and connections for proper installation and function, or seek assistance from a qualified technician for further diagnosis.