B1C2C Dodge Code - Right Side Seat Thorax Squib 1 High
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1C2C Dodge indicates Right Side Seat Thorax Squib 1 High.
- Common causes
- Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1C2C Dodge Description
What are the Possible Causes of the DTC B1C2C Dodge?
- Faulty Right Thorax Side Air Bag
- Right Thorax Side Air Bag harness is open or shorted
- Right Thorax Side Air Bag circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1C2C Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1C2C Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1C2C Dodge code?
Need more information on how to fix the B1C2C Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1C2C Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1C2C Dodge Code
1. What does OBDII code B1C2C mean on a Dodge?
B1C2C indicates a high resistance or open circuit in the right side seat thorax airbag squib 1 circuit.
2. What are the symptoms of code B1C2C in a Dodge?
Common symptoms include the airbag warning light staying on and the airbag system being disabled.
3. What causes the B1C2C code to appear?
Potential causes include damaged wiring, corroded connectors, a faulty airbag module, or a defective right side seat thorax airbag.
4. Can I still drive my Dodge with a B1C2C code?
Yes, you can drive the vehicle, but the airbag system may not function properly, which could compromise safety in a collision.
5. How do you diagnose the B1C2C code?
Diagnosis involves inspecting the wiring and connectors for damage or corrosion, checking the airbag resistance with a scan tool, and testing the airbag module.
6. How can I fix the B1C2C code on my Dodge?
Repairs may include replacing damaged wiring, cleaning or replacing corroded connectors, or replacing the right side seat thorax airbag if it’s faulty.
7. Is the B1C2C code covered under warranty for my Dodge?
Airbag issues may be covered under a vehicle’s safety warranty. Check the specifics of your Dodge warranty with the manufacturer or dealer.
8. Can a loose connector cause the B1C2C code?
Yes, a loose or improperly connected airbag harness connector can trigger this code.
9. Do I need special tools to fix the B1C2C code?
Yes, diagnosing and repairing this code typically requires a professional-grade scan tool and knowledge of airbag systems.
10. Should I disconnect the battery before working on the airbag system?
Yes, always disconnect the battery and wait several minutes to avoid accidental airbag deployment while working on the system.
Discuss the causes and fixes for B1C2C Dodge OBDII Code
Code B1C2C Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
