B1C2C Chrysler Code - Right Side Seat Thorax Squib 1 High
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1C2C Chrysler indicates Right Side Seat Thorax Squib 1 High.
- Common causes
- Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1C2C Chrysler Description
What are the Possible Causes of the DTC B1C2C Chrysler?
- Faulty Right Thorax Side Air Bag
- Right Thorax Side Air Bag harness is open or shorted
- Right Thorax Side Air Bag circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1C2C Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1C2C Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1C2C Chrysler code?
Need more information on how to fix the B1C2C Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1C2C Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1C2C Chrysler Code
1. What are common symptoms of OBDII code B1C2C Chrysler (Right Side Seat Thorax Squib 1 High)?
- Common symptoms include the airbag warning light illuminating on the dashboard and a potential loss of functionality in the right side seat thorax airbag.
2. What could cause OBDII code B1C2C Chrysler to trigger?
- This code is typically triggered by a high resistance or an open circuit in the right side seat thorax squib 1 circuit.
3. How serious is OBDII code B1C2C Chrysler?
- This code indicates an issue with the right side seat thorax airbag system, which can affect the proper deployment of the airbag during a collision. It is important to address this issue promptly for safety reasons.
4. Can I still drive my vehicle with OBDII code B1C2C Chrysler present?
- It is not recommended to drive the vehicle with this code present, as it may compromise the effectiveness of the right side seat thorax airbag in the event of a collision.
5. How can I diagnose and repair OBDII code B1C2C Chrysler?
- Diagnosis typically involves checking the wiring and connections related to the right side seat thorax squib 1 circuit. Repair may involve repairing or replacing damaged wiring, connectors, or the squib itself.
6. Is it possible to reset OBDII code B1C2C Chrysler without fixing the underlying issue?
- While you can clear the code using an OBDII scanner, it is not recommended to do so without addressing the root cause, as it may pose a safety risk in the event of an accident.
7. Are there any common mistakes to avoid when dealing with OBDII code B1C2C Chrysler?
- One common mistake is neglecting to check the wiring and connectors thoroughly, as issues in these areas are often the cause of the problem.
8. Can I fix OBDII code B1C2C Chrysler myself, or do I need a professional mechanic?
- Depending on your skill level and access to tools, you may be able to address this issue yourself by following repair guides or seeking assistance from a professional mechanic for a more thorough diagnosis and repair.
9. How much does it typically cost to repair OBDII code B1C2C Chrysler?
- The cost of repair can vary depending on the extent of the issue and whether you choose to address it yourself or seek professional help. It may involve expenses for parts and labor.
10. Is there a way to prevent OBDII code B1C2C Chrysler from occurring in the future?
- Regular maintenance and inspection of the airbag system, including checking wiring and connectors, can help prevent issues that may lead to this code triggering.
Discuss the causes and fixes for B1C2C Chrysler OBDII Code
Code B1C2C Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
