B1C2B RAM Code - Right Side Seat Thorax Squib 1 Low
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1C2B RAM indicates Right Side Seat Thorax Squib 1 Low.
- Common causes
- Common causes include Faulty Right Thorax Side Air Bag, Right Thorax Side Air Bag harness is open or shorted, Right Thorax Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1C2B RAM Description
What are the Possible Causes of the DTC B1C2B RAM?
- Faulty Right Thorax Side Air Bag
- Right Thorax Side Air Bag harness is open or shorted
- Right Thorax Side Air Bag circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1C2B RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1C2B RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1C2B RAM code?
Need more information on how to fix the B1C2B RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1C2B RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1C2B RAM Code
What does the OBDII code B1C2B indicate?
The code B1C2B indicates a problem with the right side seat thorax airbag squib 1, specifically that it is registering a low resistance condition, which may suggest a malfunction in the airbag system.
What symptoms might I experience if my vehicle has the B1C2B code?
Common symptoms may include the airbag warning light being illuminated on the dashboard, and in some cases, the airbag may not deploy in the event of a collision.
What could cause the B1C2B code to trigger?
Possible causes include a damaged or corroded wiring harness, a faulty airbag module, a defective seat squib connector, or an actual problem with the thorax airbag itself.
How can I diagnose the B1C2B code?
To diagnose this code, use an OBDII scanner to confirm the code, inspect the wiring and connectors for any damage, and test the resistance of the airbag squib circuit to ensure it is within specifications.
What repair options are available for the B1C2B code?
Repair options may include repairing or replacing damaged wiring or connectors, replacing the right side thorax airbag, or reprogramming or replacing the airbag control module if necessary.
Is it safe to drive with the B1C2B code present?
It is not recommended to drive the vehicle with the B1C2B code present, as the airbag system may not function properly in the event of an accident, putting occupants at risk.
Can a reset of the OBDII code B1C2B fix the issue?
Resetting the code may temporarily turn off the airbag light, but it will not fix the underlying issue. Proper diagnostics and repairs are necessary to address the root cause.
How can I prevent the B1C2B code from recurring?
To prevent recurrence, ensure that the airbag system is regularly inspected during vehicle maintenance, and address any electrical issues or damage to wiring and connectors immediately.
Should I attempt to repair the B1C2B code myself?
If you have experience with automotive electrical systems and airbag repairs, you may attempt it; however, due to the safety implications involved with airbag systems, it's often best to have a qualified technician perform the repairs.
Discuss the causes and fixes for B1C2B RAM OBDII Code
Code B1C2B RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
