AutoCodes – Dodge – B1C17 Dodge

B1C17 Dodge Code - Passenger Active Headrest Control Circuit

Quick Answer

The Passenger Active Headrest signal circuit is driven by a solenoid that also uses a diode in parallel. Common causes include Faulty Passenger Active Headrest, Passenger Active Headrest harness is open or shorted, Passenger Active Headrest circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1C17 Dodge indicates Passenger Active Headrest Control Circuit.
Common causes: Common causes include Faulty Passenger Active Headrest, Passenger Active Headrest harness is open or shorted, Passenger Active Headrest circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,410

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 24, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1C17 Dodge Description

The Passenger Active Headrest signal circuit is driven by a solenoid that also uses a diode in parallel. The single electrical component of the Active Headrest (AHR) unit is the latch-release solenoid. The solenoid is connected by a 2 way pigtail wire and harness connector. The pigtail wire and 2 way connector are routed through the center of one of the headrest support posts and down through the guide sleeve to the interior of the seat back, where it connects to the seat wire harness. The solenoid is grounded at an independent dedicated ground. The AHR components itself cannot be repaired. If damaged or ineffective, the AHR must be replaced as a new assembly. If upon inspection the AHR has deployed it can be reset following the proper reset method. Also if the already deployed Driver or Passenger AHR are latched in the locked position please see the scan tool miscellaneous functions to set the latch in the unlock or deployed position. The Occupant Restraint Controller (ORC) monitors the Passenger Active Headrest during the start up phase of the ORC module. The Passenger Active Headrest communication and on board diagnostics are powered by the ORC signal.

OBDII Code B1C17 Dodge - Passenger Active Headrest Control Circuit - AutoCodes.com — B1C17 Dodge Code - Passenger Active Headrest Control Circuit

What does this mean?

What are the Possible Causes of the DTC B1C17 Dodge?

Faulty Passenger Active Headrest
Passenger Active Headrest harness is open or shorted
Passenger Active Headrest circuit poor electrical connection
Fault Occupant Restraint Controller (ORC)

How to Fix the DTC B1C17 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1C11-11 PASSENGER ACTIVE HEADREST CONTROL CIRCUIT SHORT TO GROUND
B1C11-12 PASSENGER ACTIVE HEADREST CONTROL CIRCUIT SHORT TO BATTERY
B1C11-13 PASSENGER ACTIVE HEADREST CONTROL CIRCUIT OPEN

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1C17 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1C17 Dodge code?

Need more information on how to fix the B1C17 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1C17 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1C17 Dodge Code

1. What are the common symptoms of OBDII code B1C17 in a Dodge related to the Passenger Active Headrest Control Circuit?

- Common symptoms include a non-functional or improperly functioning active headrest on the passenger side, along with an illuminated warning light on the dashboard.

2. What are the possible causes of OBDII code B1C17 in a Dodge related to the Passenger Active Headrest Control Circuit?

- The code may be triggered by issues such as damaged wiring, a faulty headrest control module, a malfunctioning motor within the headrest assembly, or a problem with the headrest's position sensor.

3. How can I diagnose the underlying issue causing OBDII code B1C17 in a Dodge related to the Passenger Active Headrest Control Circuit?

- To diagnose the problem, start by visually inspecting the wiring and connectors for any visible damage. Use a multimeter to check for continuity and proper voltage in the circuit. Also, test the headrest control module, motor, and position sensor for proper functioning.

4. Can I reset OBDII code B1C17 in a Dodge related to the Passenger Active Headrest Control Circuit on my own?

- Yes, you can attempt to reset the code using an OBDII scanner. However, it is essential to address the underlying issue causing the code to prevent it from recurring.

5. How can I repair OBDII code B1C17 in a Dodge related to the Passenger Active Headrest Control Circuit?

- Depending on the specific cause, repair options may include repairing or replacing damaged wiring, replacing the headrest control module, fixing or replacing the headrest motor, or addressing any issues with the position sensor.

6. Is it safe to drive my Dodge with OBDII code B1C17 related to the Passenger Active Headrest Control Circuit?

- It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to ensure the proper functioning of the active headrest system in case of an accident.

7. How much does it typically cost to repair OBDII code B1C17 in a Dodge related to the Passenger Active Headrest Control Circuit?

- Repair costs can vary depending on the specific cause of the issue and the necessary repairs. It is advisable to consult with a professional mechanic to get an accurate estimate.

8. Can OBDII code B1C17 in a Dodge related to the Passenger Active Headrest Control Circuit cause other problems in the vehicle?

- While the code itself may not directly cause other problems, a malfunctioning passenger active headrest system could potentially impact passenger safety in the event of a collision.

9. Are there any preventive measures to avoid OBDII code B1C17 in a Dodge related to the Passenger Active Headrest Control Circuit?

- Regular maintenance checks, including inspecting the active headrest system during scheduled services, can help identify potential issues early and prevent the occurrence of this code.

10. How long does it typically take to repair OBDII code B1C17 in a Dodge related to the Passenger Active Headrest Control Circuit?

- The repair time can vary based on the specific cause of the issue and the complexity of the repairs needed. It is advisable to consult with a qualified mechanic for a more precise timeline.