AutoCodes – Jeep – B1BC7 Jeep

B1BC7 Jeep Code - Deployment Data Record Full

Quick Answer

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1BC7 Jeep indicates Deployment Data Record Full.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,617

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 23, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1BC7 Jeep Description

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the module's internal memory. The ORC checks its internal memory for the number of recorded deployment events once at every power up, during the initialization process. This Diagnostic Trouble Code (DTC) sets when the ORC detects that five recorded deploy events have been reached. Once set, this DTC is latched indefinitely.

OBDII Code B1BC7 Jeep - Deployment Data Record Full - AutoCodes.com — B1BC7 Jeep Code - Deployment Data Record Full

What does this mean?

What are the Possible Causes of the DTC B1BC7 Jeep?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection

How to Fix the DTC B1BC7 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1BC7 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1BC7 Jeep code?

Need more information on how to fix the B1BC7 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1BC7 Jeep code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1BC7 Jeep Code

1. What does OBDII code B1BC7 for Jeep mean?

The code B1BC7 indicates that the Deployment Data Record is full in a Jeep's system.

2. What are the common symptoms of OBDII code B1BC7 in a Jeep?

Common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the Jeep's airbag system.

3. What causes the Deployment Data Record to become full in a Jeep?

The Deployment Data Record may become full due to a history of airbag deployments or faults within the airbag system that trigger multiple error codes.

4. How serious is OBDII code B1BC7 in a Jeep?

OBDII code B1BC7 should be addressed promptly as it indicates potential problems with the airbag system, which could affect its proper function in the event of a collision.

5. Can I continue driving my Jeep with the B1BC7 code present?

It is not recommended to drive the Jeep with the B1BC7 code illuminated, as it indicates a problem with the airbag system that could compromise safety.

6. How can I diagnose and repair OBDII code B1BC7 in my Jeep?

Diagnosis and repair of the B1BC7 code should be performed by a qualified mechanic with the necessary diagnostic tools to reset the Deployment Data Record and address any underlying airbag system issues.

7. Is resetting the Deployment Data Record something I can do myself?

Resetting the Deployment Data Record typically requires specialized diagnostic equipment and knowledge, so it is best left to professionals familiar with Jeep's systems.

8. Will fixing OBDII code B1BC7 in my Jeep be expensive?

The cost of repairing the B1BC7 code will vary depending on the underlying issue with the airbag system, so it is advisable to get a diagnosis from a reputable mechanic.

9. Are there any safety risks associated with OBDII code B1BC7 in a Jeep?

Yes, there are potential safety risks associated with the B1BC7 code, as it indicates a problem with the airbag system that could prevent proper deployment in a collision.

10. How often should I have my Jeep's airbag system checked to prevent OBDII code B1BC7 from occurring?

Regular maintenance checks, especially after accidents or airbag deployments, can help prevent the Deployment Data Record from becoming full and triggering the B1BC7 code in a Jeep.