B1BC7 Dodge Code - Deployment Data Record Full
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1BC7 Dodge indicates Deployment Data Record Full.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1BC7 Dodge Description
What are the Possible Causes of the DTC B1BC7 Dodge?
- Faulty Occupant Restraint Controller (ORC)
- Occupant Restraint Controller (ORC) harness is open or shorted
- Occupant Restraint Controller (ORC) circuit poor electrical connection
How to Fix the DTC B1BC7 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1BC7 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1BC7 Dodge code?
Need more information on how to fix the B1BC7 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1BC7 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1BC7 Dodge Code
1. What does OBDII code B1BC7 Dodge mean?
The B1BC7 code indicates that the Deployment Data Record is full in your Dodge vehicle's airbag system.
2. What are the common symptoms of a Deployment Data Record Full code?
Common symptoms include the airbag warning light staying on, the airbag system not functioning properly, and potential diagnostic trouble codes related to the airbag system.
3. What are the possible causes of the Deployment Data Record Full code?
The code can be triggered by a variety of issues, such as a history of airbag deployments, a fault in the airbag control module, or a software glitch in the system.
4. How serious is the Deployment Data Record Full code?
This code is serious as it indicates potential issues with the airbag system, which may result in the airbags not deploying properly in the event of an accident.
5. Can I continue driving with the Deployment Data Record Full code?
It is not recommended to continue driving with the B1BC7 code present, as it indicates a problem with the airbag system that could compromise your safety in the event of a collision.
6. How can I diagnose and repair the Deployment Data Record Full code?
Diagnosing and repairing this code typically requires specialized diagnostic equipment to access the airbag system's data and clear the Deployment Data Record. It is recommended to consult a professional mechanic for proper diagnosis and repair.
7. Will clearing the code fix the issue with the airbag system?
Clearing the code may temporarily resolve the warning light, but it is crucial to address the underlying cause of the Deployment Data Record Full code to ensure the airbag system functions correctly.
8. How much does it cost to repair the Deployment Data Record Full code?
The cost of repairing the B1BC7 code can vary depending on the specific cause of the issue. It is advisable to get a diagnostic assessment from a qualified technician to determine the exact repair cost.
9. Can I reset the airbag system myself to clear the Deployment Data Record Full code?
Attempting to reset the airbag system yourself can be dangerous and may lead to unintended consequences. It is best to leave the diagnosis and repair of airbag system issues to professionals with the necessary expertise and equipment.
10. Is the Deployment Data Record Full code a common issue in Dodge vehicles?
The B1BC7 Deployment Data Record Full code is not uncommon in Dodge vehicles, especially in models with advanced airbag systems. Regular maintenance and prompt attention to airbag system warnings can help prevent this issue.
Discuss the causes and fixes for B1BC7 Dodge OBDII Code
Code B1BC7 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
