AutoCodes – Chrysler – B1BC7 Chrysler

B1BC7 Chrysler Code - Deployment Data Record Full

Quick Answer

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1BC7 Chrysler indicates Deployment Data Record Full.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,073

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 23, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1BC7 Chrysler Description

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the module's internal memory. The ORC checks its internal memory for the number of recorded deployment events once at every power up, during the initialization process. This Diagnostic Trouble Code (DTC) sets when the ORC detects that five recorded deploy events have been reached. Once set, this DTC is latched indefinitely.

OBDII Code B1BC7 Chrysler - Deployment Data Record Full - AutoCodes.com — B1BC7 Chrysler Code - Deployment Data Record Full

What does this mean?

What are the Possible Causes of the DTC B1BC7 Chrysler?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection

How to Fix the DTC B1BC7 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1BC7 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1BC7 Chrysler code?

Need more information on how to fix the B1BC7 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1BC7 Chrysler code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1BC7 Chrysler Code

1. What does the OBDII code B1BC7 Chrysler Deployment Data Record Full mean?

This code indicates that the deployment data record in the vehicle's system is full, preventing new data from being stored.

2. What are the common symptoms of the B1BC7 code?

Common symptoms may include the airbag warning light illuminating on the dashboard and potential issues with the airbag system's functionality.

3. What are the possible causes of the Deployment Data Record Full code?

The main cause is typically an excessive amount of crash data stored in the system, which can happen due to previous accidents or malfunctions.

4. How serious is the B1BC7 fault code?

This code is important to address promptly, as it may indicate that the airbag system is unable to store new data, potentially compromising its ability to function correctly in the event of an accident.

5. Can I continue driving with the B1BC7 code present?

It is not recommended to continue driving with this code active, as it may affect the proper operation of the airbag system when needed.

6. How can I diagnose the B1BC7 Deployment Data Record Full code?

Diagnosis typically involves using an OBDII scanner to retrieve the code and further inspection by a qualified technician to determine the cause of the full deployment data record.

7. What are the repair options for the B1BC7 code?

Repair options may include clearing the crash data from the system, resetting the airbag module, or replacing faulty components contributing to the issue.

8. Is it possible to clear the B1BC7 code without professional help?

While it may be possible to clear the code using an OBDII scanner, diagnosing and repairing the root cause of the issue is best left to a qualified mechanic.

9. How much does it cost to fix the B1BC7 code?

The cost of repair can vary depending on the exact cause of the issue, but it may involve labor charges for diagnosis and potential replacement of components within the airbag system.

10. Can the B1BC7 code be prevented from reoccurring?

Regular maintenance of the vehicle and addressing any airbag system issues promptly can help prevent the Deployment Data Record Full code from reoccurring in the future.