AutoCodes – Chrysler – B1BBD Chrysler

B1BBD Chrysler Code - Occupant Classification Module Current Table Unprogrammed

Quick Answer

If the Configuration Table is not programmed at the supplier or when the checksum is invalid. Common causes include Faulty Occupant Classification Module (OCM), Occupant Classification Module (OCM) harness is open or shorted, Occupant Classification Module (OCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1BBD Chrysler indicates Occupant Classification Module Current Table Unprogrammed.
Common causes: Common causes include Faulty Occupant Classification Module (OCM), Occupant Classification Module (OCM) harness is open or shorted, Occupant Classification Module (OCM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 585

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 23, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1BBD Chrysler Description

If the Configuration Table is not programmed at the supplier or when the checksum is invalid. This Diagnostic Trouble Code (DTC) will set if the module was received unprogrammed from the supplier, the vehicle line was not identified correctly or if the flash procedure was not completed successfully

OBDII Code B1BBD Chrysler - Occupant Classification Module Current Table Unprogrammed - AutoCodes.com — B1BBD Chrysler Code - Occupant Classification Module Current Table Unprogrammed

What does this mean?

What are the Possible Causes of the DTC B1BBD Chrysler?

Faulty Occupant Classification Module (OCM)
Occupant Classification Module (OCM) harness is open or shorted
Occupant Classification Module (OCM) circuit poor electrical connection

How to Fix the DTC B1BBD Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1BBD Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1BBD Chrysler code?

Need more information on how to fix the B1BBD Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1BBD Chrysler code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1BBD Chrysler Code

1. What are the common symptoms of OBDII code B1BBD in a Chrysler related to the Occupant Classification Module Current Table Unprogrammed?

The common symptoms include the airbag warning light staying illuminated, the passenger airbag being disabled, and potential issues with the seat belt warning system.

2. What are the possible causes of the B1BBD OBDII code in a Chrysler?

The code B1BBD typically indicates that the Occupant Classification Module's current table is unprogrammed, which can be due to a faulty module, software glitch, or a disconnected sensor.

3. How can I diagnose the B1BBD code related to the Occupant Classification Module in my Chrysler?

Diagnosing this code usually involves using an OBDII scanner to retrieve the specific error code, inspecting the connections to the Occupant Classification Module, and conducting a software update or reprogramming if necessary.

4. Can I continue driving my Chrysler if the B1BBD code is present?

It is not recommended to drive the vehicle with the B1BBD code active, as it indicates a potential issue with the airbag system, which is crucial for occupant safety in the event of a collision.

5. How can I repair the B1BBD OBDII code in my Chrysler?

Repairing the B1BBD code may involve reprogramming the Occupant Classification Module, replacing a faulty sensor, or updating the software to ensure the module's current table is programmed correctly.

6. Is it possible to reset the B1BBD code in a Chrysler without fixing the underlying issue?

While you can clear the code with an OBDII scanner, it is essential to address the root cause of the problem to ensure the safety and proper functionality of the airbag system.

7. Are there any DIY tips for resolving the B1BBD code related to the Occupant Classification Module in a Chrysler?

DIY tips may include checking the connections to the module, ensuring all sensors are properly connected, and following the manufacturer's instructions for reprogramming or updating the software.

8. How much does it cost to repair the B1BBD code in a Chrysler at a dealership or repair shop?

The cost of repairing the B1BBD code can vary depending on the specific issue, but it may involve diagnostic fees, labor costs for reprogramming or sensor replacement, and any necessary parts.

9. Can the B1BBD OBDII code in a Chrysler be a recurring issue?

If the underlying cause of the B1BBD code is not properly addressed, it may reoccur, potentially leading to continued issues with the airbag system and occupant safety.

10. Is the B1BBD OBDII code related to the Occupant Classification Module covered under any Chrysler warranty?

The coverage of the B1BBD code under warranty may depend on the vehicle's age, mileage, and specific warranty terms, so it is recommended to check with the dealership or manufacturer for more information.