B1BAA Chrysler Code - Occupant Classification Module Configuration Mismatch
Quick Answer
This Diagnostic Trouble Code (DTC) will set if the Occupant Restraint Controller (ORC) is not configured for the Occupant Classification Module (OCM) and the OCM is active on the CAN Bus. Common causes include Faulty Front Control Module (FCM), Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1BAA Chrysler indicates Occupant Classification Module Configuration Mismatch.
- Common causes
- Common causes include Faulty Front Control Module (FCM), Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1BAA Chrysler Description
What are the Possible Causes of the DTC B1BAA Chrysler?
- Faulty Front Control Module (FCM)
- Faulty Occupant Restraint Controller (ORC)
- Occupant Restraint Controller (ORC) harness is open or shorted
- Occupant Restraint Controller (ORC) circuit poor electrical connection
How to Fix the DTC B1BAA Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1BAA Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1BAA Chrysler code?
Need more information on how to fix the B1BAA Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1BAA Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1BAA Chrysler Code
1. What does the OBDII code B1BAA mean on a Chrysler vehicle?
B1BAA indicates a configuration mismatch in the Occupant Classification Module (OCM), which monitors the passenger seat to control airbag deployment based on weight and presence.
2. What are the common symptoms of the B1BAA code?
Symptoms may include the airbag warning light being illuminated, issues with the passenger airbag deactivating improperly, or errors in the occupant detection system.
3. What causes the B1BAA Occupant Classification Module Configuration Mismatch code?
The code is typically caused by incorrect programming of the OCM, a replaced or faulty OCM, wiring or connector issues, or a mismatch between the OCM and other vehicle control modules.
4. Can a dead battery trigger the B1BAA code on a Chrysler?
Yes, if the battery dies or is disconnected improperly, it can cause module communication issues or configuration mismatches, potentially triggering this code.
5. How is the B1BAA code diagnosed?
A technician will use a scan tool to confirm the code, check the OCM configuration, inspect wiring and connectors, and verify communication between the OCM and other modules.
6. Can I drive my Chrysler with the B1BAA code present?
While the vehicle may still be drivable, the airbag system may not function correctly, posing a safety risk in the event of an accident.
7. How do you fix the B1BAA code on a Chrysler?
Repairs may involve reprogramming the OCM, replacing a faulty OCM, fixing damaged wiring or connectors, or resolving any communication issues between modules.
8. Is it expensive to repair the B1BAA code?
The cost depends on whether reprogramming or part replacement is needed. Reprogramming is generally less expensive, while replacing the module or repairing wiring may be more costly.
9. Can a faulty sensor cause the B1BAA code?
Yes, a malfunctioning weight sensor in the passenger seat or an issue with the OCM itself can contribute to this code.
10. Do I need specialized tools to fix the B1BAA code?
Yes, resolving this code typically requires a professional scan tool capable of accessing and reprogramming the OCM or performing module diagnostics.
Discuss the causes and fixes for B1BAA Chrysler OBDII Code
Code B1BAA Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
