AutoCodes – Generic – B1BA5

B1BA5 Code - Air Bag Squib Configuration Mismatch

Quick Answer

The B1BA5 code is set if an Occupant Restraint Controller (ORC) configured for vehicles without side airbags is installed in a vehicle with side airbags. Common causes include Faulty Powertrain Control Module (PCM), Faulty Occupant Restraint Controller (ORC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1BA5 indicates Air Bag Squib Configuration Mismatch.
Common causes: Common causes include Faulty Powertrain Control Module (PCM), Faulty Occupant Restraint Controller (ORC).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,018

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 23, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1BA5 Description

The B1BA5 code is set if an Occupant Restraint Controller (ORC) configured for vehicles without side airbags is installed in a vehicle with side airbags.

OBDII Code B1BA5 - Air Bag Squib Configuration Mismatch - AutoCodes.com — B1BA5 Code - Air Bag Squib Configuration Mismatch

What does this mean?

What are the Possible Causes of the DTC B1BA5?

Faulty Powertrain Control Module (PCM)
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1BA5?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1BA5 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1BA5 code?

Need more information on how to fix the B1BA5 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1BA5 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1BA5 Chrysler — Air Bag Squib Configuration Mismatch
B1BA5 Dodge — Air Bag Squib Configuration Mismatch
B1BA5 Jeep — Air Bag Squib Configuration Mismatch
B1BA5 Mitsubishi — Air Bag Squib Configuration Mismatch
B1BA5 RAM — Air Bag Squib Configuration Mismatch

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1BA5 Code

1. What are the common symptoms of OBDII code B1BA5, Air Bag Squib Configuration Mismatch?

The common symptoms include the airbag warning light illuminating on the dashboard and a potential message indicating an issue with the airbag system.

2. What can cause the OBDII code B1BA5, Air Bag Squib Configuration Mismatch?

This code is typically caused by a mismatch between the configuration data stored in the airbag control module and the actual configuration of the airbag squib components.

3. How serious is the OBDII code B1BA5, Air Bag Squib Configuration Mismatch?

This code indicates a potential issue with the airbag system, which is a critical safety component in a vehicle. It is important to address this issue promptly to ensure the proper functioning of the airbags in case of an accident.

4. Can I continue driving with the OBDII code B1BA5, Air Bag Squib Configuration Mismatch?

It is not recommended to continue driving with this code present, as it indicates a potential problem with the airbag system. Driving with a malfunctioning airbag system can compromise your safety in the event of a collision.

5. How can I repair the OBDII code B1BA5, Air Bag Squib Configuration Mismatch?

To repair this code, the airbag control module may need to be reprogrammed with the correct configuration data for the airbag squib components. This typically requires specialized diagnostic equipment and knowledge.

6. Can I reset the OBDII code B1BA5, Air Bag Squib Configuration Mismatch myself?

Resetting the code may temporarily turn off the warning light, but it will not address the underlying issue causing the mismatch. It is recommended to have the airbag system inspected and repaired by a qualified technician.

7. How much does it cost to repair the OBDII code B1BA5, Air Bag Squib Configuration Mismatch?

The cost of repairing this code can vary depending on the extent of the issue and the labor rates of the repair shop. It is advisable to get a diagnosis from a professional to determine the exact repair cost.

8. Can a DIY enthusiast fix the OBDII code B1BA5, Air Bag Squib Configuration Mismatch?

Repairing this code typically requires specialized knowledge and equipment, so it is not recommended for DIY enthusiasts. It is best to leave this type of repair to experienced professionals to ensure the airbag system's proper functioning.

9. Are there any safety precautions I should take if the OBDII code B1BA5, Air Bag Squib Configuration Mismatch is present?

If this code is present, it is important to drive cautiously and avoid situations where airbag deployment may be necessary. Visit a qualified technician as soon as possible to address the issue and ensure the airbag system's proper operation.

10. How often does the OBDII code B1BA5, Air Bag Squib Configuration Mismatch occur?

This code can occur in vehicles equipped with an OBDII system when there is a mismatch between the configuration data and the airbag squib components. While it may not be a common occurrence, it is essential to address it promptly for safety reasons.