B1B97 Mitsubishi Code - Passenger Seat Track Position Sensor Configuration Mismatch
Quick Answer
The Occupant Classification Module (OCM) monitors the Passenger Seat Track Position Sensor. Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B97 Mitsubishi indicates Passenger Seat Track Position Sensor Configuration Mismatch.
- Common causes
- Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B97 Mitsubishi Description
What are the Possible Causes of the DTC B1B97 Mitsubishi?
- Faulty Passenger Seat Track Position Sensor
- Passenger Seat Track Position Sensor harness is open or shorted
- Passenger Seat Track Position Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B97 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B97 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B97 Mitsubishi code?
Need more information on how to fix the B1B97 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B97 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B97 Mitsubishi Code
1. What are the common symptoms of OBDII code B1B97 in a Mitsubishi related to Passenger Seat Track Position Sensor Configuration Mismatch?
- The common symptoms include malfunctioning power seat adjustments, airbag warning lights illuminated on the dashboard, and potential issues with airbag deployment in case of a collision.
2. What causes the OBDII code B1B97 in a Mitsubishi, indicating Passenger Seat Track Position Sensor Configuration Mismatch?
- The code B1B97 is typically triggered when there is a mismatch between the actual position of the passenger seat track and the configuration stored in the vehicle's system.
3. How can I diagnose the Passenger Seat Track Position Sensor Configuration Mismatch issue causing the B1B97 code in my Mitsubishi?
- To diagnose this problem, it is recommended to use a diagnostic scanner that can read and interpret the specific codes related to the passenger seat track position sensor configuration. Additionally, visually inspecting the seat track for any physical damage or misalignment can also be helpful.
4. Is it safe to drive my Mitsubishi with the OBDII code B1B97 related to Passenger Seat Track Position Sensor Configuration Mismatch?
- It is not advisable to drive the vehicle with this issue unresolved, as it may affect the proper functioning of the passenger seat adjustments and potentially compromise the safety features related to airbag deployment.
5. Can I repair the Passenger Seat Track Position Sensor Configuration Mismatch issue causing the B1B97 code in my Mitsubishi myself?
- While some basic troubleshooting steps can be performed by DIY enthusiasts, resolving the specific sensor configuration mismatch may require specialized tools and expertise. It is recommended to seek professional help for an accurate diagnosis and repair.
6. Are there any temporary fixes or workarounds for the B1B97 code related to Passenger Seat Track Position Sensor Configuration Mismatch in a Mitsubishi?
- Temporary fixes are not recommended for safety-related issues like this. It is essential to address the root cause of the problem promptly to ensure the proper functioning of the passenger seat and airbag systems.
7. How much does it typically cost to repair the Passenger Seat Track Position Sensor Configuration Mismatch problem causing the B1B97 code in a Mitsubishi?
- The cost of repair can vary depending on the extent of the issue, labor rates in your area, and whether any parts need to be replaced. It is advisable to obtain quotes from reputable automotive technicians or service centers.
8. Can resetting the OBDII system clear the B1B97 code related to Passenger Seat Track Position Sensor Configuration Mismatch in my Mitsubishi?
- While resetting the OBDII system may temporarily clear the code, it is likely to reappear if the root cause of the configuration mismatch is not addressed. Resetting alone is not a permanent solution.
9. Will the malfunctioning Passenger Seat Track Position Sensor Configuration affect the overall safety of my Mitsubishi?
- Yes, the malfunctioning sensor configuration can potentially impact the safety features of your vehicle, particularly concerning the proper functioning of the airbag system in the event of a collision.
10. How long does it typically take to repair the Passenger Seat Track Position Sensor Configuration Mismatch issue causing the B1B97 code in a Mitsubishi?
- The repair time can vary based on the complexity of the problem and the availability of parts. In general, it may take a few hours to a day for a qualified technician to diagnose and rectify the sensor configuration mismatch.
Discuss the causes and fixes for B1B97 Mitsubishi OBDII Code
Code B1B97 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
