B1B97 Jeep Code - Passenger Seat Track Position Sensor Configuration Mismatch
Quick Answer
The Occupant Classification Module (OCM) monitors the Passenger Seat Track Position Sensor. Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B97 Jeep indicates Passenger Seat Track Position Sensor Configuration Mismatch.
- Common causes
- Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B97 Jeep Description
What are the Possible Causes of the DTC B1B97 Jeep?
- Faulty Passenger Seat Track Position Sensor
- Passenger Seat Track Position Sensor harness is open or shorted
- Passenger Seat Track Position Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B97 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B97 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B97 Jeep code?
Need more information on how to fix the B1B97 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B97 Jeep code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B97 Jeep Code
1. What does OBDII code B1B97 mean on a Jeep?
Code B1B97 indicates a "Passenger Seat Track Position Sensor Configuration Mismatch," meaning there is an issue with the sensor that monitors the position of the passenger seat.
2. What are the symptoms of code B1B97 in a Jeep?
Common symptoms include an illuminated airbag warning light, malfunctioning passenger seat sensors, and possible deactivation of the passenger airbag.
3. What causes code B1B97 to appear?
This code can be caused by a faulty seat track position sensor, incorrect sensor calibration, damaged wiring, or a malfunctioning airbag control module.
4. Can I drive my Jeep with code B1B97 active?
While you can technically drive with this code, it may affect the proper deployment of the passenger airbag in an accident, posing a safety risk.
5. How do I diagnose code B1B97 in my Jeep?
Start by scanning for trouble codes using an OBDII scanner, inspecting the passenger seat track position sensor, and checking for damaged wiring or loose connections.
6. How can I fix code B1B97 in my Jeep?
Repairs may involve recalibrating the seat position sensor, replacing a faulty sensor, repairing damaged wiring, or updating/replacing the airbag control module.
7. Does the passenger seat track position sensor affect the airbag system?
Yes, this sensor determines the correct position of the passenger seat to adjust airbag deployment, so a mismatch can impair airbag functionality.
8. Is a B1B97 code covered under warranty?
Depending on your Jeep's warranty and mileage, seat sensor or airbag-related repairs may be covered. Check with your dealership for details.
9. How much does it cost to fix a B1B97 code on a Jeep?
Repair costs can vary but typically range from $150 to $500, depending on whether the issue is with the sensor, wiring, or airbag control module.
10. Can a B1B97 code be cleared without repairs?
Clearing the code without addressing the underlying issue is not recommended, as the problem will likely persist and could compromise passenger safety.
Discuss the causes and fixes for B1B97 Jeep OBDII Code
Code B1B97 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
