B1B97 Dodge Code - Passenger Seat Track Position Sensor Configuration Mismatch
Quick Answer
The Occupant Classification Module (OCM) monitors the Passenger Seat Track Position Sensor. Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B97 Dodge indicates Passenger Seat Track Position Sensor Configuration Mismatch.
- Common causes
- Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B97 Dodge Description
What are the Possible Causes of the DTC B1B97 Dodge?
- Faulty Passenger Seat Track Position Sensor
- Passenger Seat Track Position Sensor harness is open or shorted
- Passenger Seat Track Position Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B97 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B97 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B97 Dodge code?
Need more information on how to fix the B1B97 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B97 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B97 Dodge Code
1. What does the OBDII code B1B97 mean on a Dodge vehicle?
The B1B97 code indicates a "Passenger Seat Track Position Sensor Configuration Mismatch," meaning there’s an issue with the calibration or communication of the seat track position sensor.
2. What are the common symptoms of the B1B97 code?
Symptoms may include the airbag warning light staying on, difficulty adjusting the passenger seat, or improper airbag deployment behavior due to incorrect seat position data.
3. What causes the B1B97 code to appear?
Common causes include a miscalibrated seat track position sensor, a faulty or damaged sensor, wiring issues, or an incompatible replacement seat track or sensor.
4. Is the B1B97 code related to airbag safety?
Yes, the passenger seat track position sensor is part of the airbag system. A mismatch can lead to incorrect airbag deployment decisions.
5. Can I drive my Dodge with the B1B97 code active?
While the vehicle may still be drivable, it’s not recommended to ignore this code as it may impact airbag functionality in the event of an accident.
6. How is the B1B97 code diagnosed?
A technician will use a scan tool to confirm the code, inspect the seat track position sensor, check for wiring issues, and verify proper sensor calibration.
7. How can I fix the B1B97 code?
Repairs may involve recalibrating the seat track position sensor, repairing damaged wiring, or replacing the faulty sensor or seat track components.
8. Does replacing the passenger seat trigger the B1B97 code?
Yes, an improperly configured or incompatible replacement passenger seat or sensor can cause this code to appear.
9. How much does it cost to fix the B1B97 code?
Repair costs vary depending on the issue but typically range from $100 to $500, including sensor replacement and calibration.
10. Can I reset the B1B97 code without repairs?
Clearing the code without addressing the root cause may temporarily turn off the warning light, but the issue will likely return until properly fixed.
Discuss the causes and fixes for B1B97 Dodge OBDII Code
Code B1B97 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
