B1B95 Chrysler Code - Passenger Seat Track Position Sensor Circuit Open
Quick Answer
The Occupant Classification Module (OCM) monitors the Driver Seat Track Position Sensor. Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B95 Chrysler indicates Passenger Seat Track Position Sensor Circuit Open.
- Common causes
- Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B95 Chrysler Description
What are the Possible Causes of the DTC B1B95 Chrysler?
- Faulty Passenger Seat Track Position Sensor
- Passenger Seat Track Position Sensor harness is open or shorted
- Passenger Seat Track Position Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B95 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B95 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B95 Chrysler code?
Need more information on how to fix the B1B95 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B95 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B95 Chrysler Code
1. What does the OBDII code B1B95 mean on a Chrysler vehicle?
The B1B95 code indicates an issue with the Passenger Seat Track Position Sensor Circuit, specifically an open circuit or disconnection.
2. What are the common symptoms associated with the B1B95 code?
Symptoms may include the airbag warning light being illuminated, malfunctioning passenger seat sensors, or the airbag system being disabled.
3. What causes the B1B95 code to appear?
Common causes include a damaged or disconnected passenger seat track position sensor, corroded or damaged wiring, or a faulty sensor.
4. Can the B1B95 code affect the airbag system?
Yes, this code can disable the airbag system for the passenger seat, potentially compromising occupant safety in a collision.
5. How do I diagnose the B1B95 code?
Diagnosis typically involves inspecting the wiring and connectors for damage, testing the seat track position sensor, and using a scan tool to monitor sensor operation.
6. Can I drive my vehicle with the B1B95 code active?
While the vehicle may still be drivable, the airbag system may not function properly, posing a safety risk in an accident.
7. How is the B1B95 code fixed?
Repairs may include reconnecting or replacing the sensor, repairing damaged wiring, or addressing issues with the sensor's electrical connections.
8. How much does it cost to fix the B1B95 code?
Repair costs vary but typically range from $100 to $300, depending on whether the sensor, wiring, or connectors need replacement.
9. Can a faulty passenger seat track position sensor cause other codes?
Yes, it may trigger additional airbag-related codes if the sensor affects other components within the system.
10. Do I need to reset the airbag system after fixing the B1B95 code?
Yes, after repairs, the airbag system should be reset using a scan tool to clear the code and ensure proper functionality.
Discuss the causes and fixes for B1B95 Chrysler OBDII Code
Code B1B95 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
