B1B93 Jeep Code - Passenger Seat Track Position Sensor Circuit Low
Quick Answer
The Occupant Classification Module (OCM) monitors the Driver Seat Track Position Sensor. Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B93 Jeep indicates Passenger Seat Track Position Sensor Circuit Low.
- Common causes
- Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B93 Jeep Description
What are the Possible Causes of the DTC B1B93 Jeep?
- Faulty Passenger Seat Track Position Sensor
- Passenger Seat Track Position Sensor harness is open or shorted
- Passenger Seat Track Position Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B93 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B93 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B93 Jeep code?
Need more information on how to fix the B1B93 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B93 Jeep code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B93 Jeep Code
1. What does the OBDII code B1B93 mean in a Jeep?
The code B1B93 indicates an issue with the Passenger Seat Track Position Sensor Circuit, specifically a low voltage condition.
2. What are the common symptoms of the B1B93 code?
Common symptoms include the airbag warning light turning on, disabled passenger airbag functionality, and potential errors in seat position adjustment.
3. What causes the B1B93 code to appear?
This code is typically caused by a faulty passenger seat track position sensor, damaged wiring, poor electrical connections, or a failed airbag module.
4. Can I still drive my Jeep with the B1B93 code active?
Yes, you can drive, but the passenger airbag may not deploy correctly in an accident, compromising safety.
5. How do I diagnose the B1B93 code in my Jeep?
Start by inspecting the passenger seat wiring and connectors for damage or corrosion. Then, test the seat track position sensor with a multimeter to check for proper voltage.
6. How is the B1B93 code fixed?
Repairs may include replacing the seat track position sensor, repairing or replacing damaged wiring, or reprogramming the airbag control module if necessary.
7. How much does it cost to fix the B1B93 code?
Repair costs vary but typically range from $100 to $300, depending on whether the issue is with the sensor, wiring, or the airbag module.
8. Can a faulty seat track position sensor cause other issues?
Yes, it can interfere with the airbag system's ability to detect the passenger’s position, potentially affecting airbag deployment.
9. Does clearing the code fix the B1B93 issue?
Clearing the code may turn off the warning light temporarily, but the underlying issue must be resolved to prevent the code from returning.
10. Can I replace the passenger seat track position sensor myself?
If you have basic mechanical and electrical skills, you may be able to replace the sensor, but ensure the airbag system is disabled before starting to avoid accidental deployment.
Discuss the causes and fixes for B1B93 Jeep OBDII Code
Code B1B93 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
