B1B93 Dodge Code - Passenger Seat Track Position Sensor Circuit Low
Quick Answer
The Occupant Classification Module (OCM) monitors the Driver Seat Track Position Sensor. Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B93 Dodge indicates Passenger Seat Track Position Sensor Circuit Low.
- Common causes
- Common causes include Faulty Passenger Seat Track Position Sensor, Passenger Seat Track Position Sensor harness is open or shorted, Passenger Seat Track Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B93 Dodge Description
What are the Possible Causes of the DTC B1B93 Dodge?
- Faulty Passenger Seat Track Position Sensor
- Passenger Seat Track Position Sensor harness is open or shorted
- Passenger Seat Track Position Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B93 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B93 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B93 Dodge code?
Need more information on how to fix the B1B93 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B93 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B93 Dodge Code
1. What are the common symptoms of OBDII code B1B93 in a Dodge related to the Passenger Seat Track Position Sensor Circuit Low?
- Common symptoms include the passenger seat being stuck in one position, the seat not moving when adjusting, and potential warning lights on the dashboard.
2. What are the possible causes of the B1B93 OBDII code in a Dodge, indicating the Passenger Seat Track Position Sensor Circuit Low?
- Potential causes include a faulty seat track position sensor, damaged wiring or connectors, a malfunctioning control module, or issues with the seat track mechanism.
3. How can I diagnose the B1B93 code in my Dodge if I suspect an issue with the Passenger Seat Track Position Sensor Circuit?
- You can use a diagnostic scanner to read the fault code, visually inspect the wiring and connectors for any damage, test the sensor for proper function, and check the seat track mechanism for obstructions.
4. Can I repair the Passenger Seat Track Position Sensor Circuit Low issue in my Dodge myself?
- Depending on the exact cause, you may be able to perform some repairs yourself, such as replacing a faulty sensor or repairing damaged wiring. However, more complex issues may require professional diagnosis and repair.
5. Is it safe to continue driving my Dodge with the B1B93 OBDII code related to the Passenger Seat Track Position Sensor Circuit Low?
- It is generally not recommended to drive the vehicle with this issue, as the passenger seat may not be properly secured in case of sudden stops or accidents. It is best to address the problem promptly.
6. How much does it typically cost to repair the B1B93 code in a Dodge due to the Passenger Seat Track Position Sensor Circuit Low?
- The cost of repairs can vary depending on the exact cause of the issue and whether you choose to do the repairs yourself or take the vehicle to a professional mechanic. Costs may include parts and labor.
7. Can resetting the OBDII system clear the B1B93 code in a Dodge related to the Passenger Seat Track Position Sensor Circuit Low?
- Resetting the system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It is crucial to diagnose and fix the root cause of the problem.
8. Are there any safety precautions I should take when working on the Passenger Seat Track Position Sensor Circuit in my Dodge?
- It is essential to disconnect the battery before working on any electrical components to prevent accidental deployment of the airbags or electrical shock. Follow proper safety procedures outlined in the vehicle's manual.
9. Will the B1B93 OBDII code related to the Passenger Seat Track Position Sensor Circuit Low affect the overall performance of my Dodge?
- While this code may not directly impact the performance of the vehicle's engine or drivability, it can affect the functionality and safety of the passenger seat adjustment system. Addressing the issue promptly is recommended.
10. How can I prevent the recurrence of the B1B93 OBDII code in my Dodge after repairing the Passenger Seat Track Position Sensor Circuit Low issue?
- Regularly inspecting and maintaining the seat track position sensor, wiring, and connectors can help prevent the code from reoccurring. Follow proper installation procedures when replacing components to ensure proper functioning.
Discuss the causes and fixes for B1B93 Dodge OBDII Code
Code B1B93 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
