B1B8E Dodge Code - Driver Seat Track Position Sensor Circuit High
Quick Answer
The Occupant Classification Module (OCM) monitors the Driver Seat Track Position Sensor. Common causes include Faulty Driver Seat Track Position Sensor, Driver Seat Track Position Sensor harness is open or shorted, Driver Seat Track Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B8E Dodge indicates Driver Seat Track Position Sensor Circuit High.
- Common causes
- Common causes include Faulty Driver Seat Track Position Sensor, Driver Seat Track Position Sensor harness is open or shorted, Driver Seat Track Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B8E Dodge Description
What are the Possible Causes of the DTC B1B8E Dodge?
- Faulty Driver Seat Track Position Sensor
- Driver Seat Track Position Sensor harness is open or shorted
- Driver Seat Track Position Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B8E Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B8E Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B8E Dodge code?
Need more information on how to fix the B1B8E Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B8E Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B8E Dodge Code
1. What are the common symptoms of OBDII code B1B8E Dodge (Driver Seat Track Position Sensor Circuit High)?
The common symptoms include the driver's seat being unable to move forward or backward, the seat moving on its own, or the seat getting stuck in one position.
2. What are the possible causes of OBDII code B1B8E Dodge?
Possible causes include a faulty driver seat track position sensor, damaged wiring or connectors related to the sensor, or a problem with the seat control module.
3. How can I diagnose the issue related to OBDII code B1B8E Dodge?
You can diagnose the problem by checking the wiring and connectors for any damage, testing the driver seat track position sensor for proper functioning, and scanning the vehicle with an OBDII scanner for any additional fault codes.
4. Can I still drive my vehicle with OBDII code B1B8E Dodge present?
It is not recommended to drive the vehicle with this code present, as it can affect the driver's ability to adjust the seat position, potentially leading to discomfort or safety issues.
5. How can I repair OBDII code B1B8E Dodge (Driver Seat Track Position Sensor Circuit High)?
Repair options include replacing the faulty driver seat track position sensor, repairing any damaged wiring or connectors, or resetting the seat control module.
6. Are there any DIY tips for fixing OBDII code B1B8E Dodge?
DIY tips include checking the wiring and connectors for any visible damage, ensuring all connections are secure, and following the manufacturer's repair manual for step-by-step instructions.
7. Can resetting the vehicle's computer clear OBDII code B1B8E Dodge?
Resetting the vehicle's computer may temporarily clear the code, but it is important to address the underlying issue causing the code to prevent it from reoccurring.
8. Is it safe to attempt to repair OBDII code B1B8E Dodge without prior automotive experience?
It is recommended to have some automotive experience or seek professional help when dealing with OBDII codes to ensure the issue is diagnosed and repaired correctly.
9. How much does it typically cost to repair OBDII code B1B8E Dodge at a dealership or auto repair shop?
The cost of repairs can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. Can OBDII code B1B8E Dodge affect the vehicle's overall performance or safety?
While this code may not directly impact the vehicle's performance, it can affect the driver's comfort and safety by inhibiting the ability to adjust the driver's seat position.
Discuss the causes and fixes for B1B8E Dodge OBDII Code
Code B1B8E Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
