B1B8C RAM Code - Driver Seat Track Position Sensor Circuit Performance
Quick Answer
The Occupant Classification Module (OCM) monitors the Driver Seat Track Position Sensor. Common causes include Faulty Driver Seat Track Position Sensor, Driver Seat Track Position Sensor harness is open or shorted, Driver Seat Track Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B8C RAM indicates Driver Seat Track Position Sensor Circuit Performance.
- Common causes
- Common causes include Faulty Driver Seat Track Position Sensor, Driver Seat Track Position Sensor harness is open or shorted, Driver Seat Track Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B8C RAM Description
What are the Possible Causes of the DTC B1B8C RAM?
- Faulty Driver Seat Track Position Sensor
- Driver Seat Track Position Sensor harness is open or shorted
- Driver Seat Track Position Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B8C RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B8C RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B8C RAM code?
Need more information on how to fix the B1B8C RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B8C RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B8C RAM Code
1. What does the OBDII code B1B8C mean?
The code B1B8C indicates a performance issue in the Driver Seat Track Position Sensor Circuit, which monitors the position of the driver's seat to ensure proper airbag deployment.
2. What are the common symptoms of the B1B8C code?
Common symptoms include an illuminated airbag warning light, malfunctioning seat position adjustment, and possible deactivation of the driver's airbag system.
3. What causes the B1B8C code to appear?
This code is typically caused by a faulty seat track position sensor, damaged wiring or connectors, or an issue with the vehicle's control module.
4. Can I drive my car with the B1B8C code active?
While the car may still be driveable, the airbag system could be compromised, posing a safety risk in the event of an accident.
5. How can I fix the B1B8C code?
Inspect the seat track position sensor, wiring, and connectors for damage or corrosion. Replace any faulty components and clear the code using an OBDII scanner.
6. How do I know if the seat track position sensor is faulty?
A faulty sensor may show physical damage or fail a diagnostic test performed with a multimeter or scan tool.
7. Is the B1B8C code covered under warranty?
It depends on your vehicle's warranty terms. Safety-related components like airbag sensors may fall under extended coverage in some cases.
8. Can a dead battery cause the B1B8C code?
A dead or weak battery can sometimes lead to communication errors, but this code is more likely related to hardware issues in the sensor or circuit.
9. How much does it cost to repair the B1B8C code?
Repair costs can range from $100 to $500, depending on whether the sensor, wiring, or control module needs replacement.
10. Can I reset the B1B8C code without fixing the problem?
You can clear the code with an OBDII scanner, but it will likely return unless the underlying issue is resolved.
Discuss the causes and fixes for B1B8C RAM OBDII Code
Code B1B8C RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
