B1B88 RAM Code - Passenger Seat Weight Sensor 1 Right Rear Input Circuit Low
Quick Answer
If the module detects that the sensor input is less than 3.4 +/- 0.6% of the Seat Weight Sensor 5 Volt circuit voltage. Common causes include Faulty Right Rear Passenger Seat Weight Sensor, Right Rear Passenger Seat Weight Sensor harness is open or shorted, Right Rear Passenger Seat Weight Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B88 RAM indicates Passenger Seat Weight Sensor 1 Right Rear Input Circuit Low.
- Common causes
- Common causes include Faulty Right Rear Passenger Seat Weight Sensor, Right Rear Passenger Seat Weight Sensor harness is open or shorted, Right Rear Passenger Seat Weight Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B88 RAM Description
What are the Possible Causes of the DTC B1B88 RAM?
- Faulty Right Rear Passenger Seat Weight Sensor
- Right Rear Passenger Seat Weight Sensor harness is open or shorted
- Right Rear Passenger Seat Weight Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B88 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B88 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B88 RAM code?
Need more information on how to fix the B1B88 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B88 RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B88 RAM Code
What are the common symptoms of OBDII code B1B88 RAM?
- Common symptoms include the airbag warning light illuminating on the dashboard, issues with the passenger seat weight sensor, and potential airbag system malfunctions.
What can cause OBDII code B1B88 RAM to trigger?
- This code is typically triggered by a malfunction in the passenger seat weight sensor 1 right rear input circuit, which can be caused by damaged wiring, a faulty sensor, or a poor connection.
How can I diagnose the issue related to code B1B88 RAM?
- You can diagnose the issue by using a diagnostic scanner to retrieve the trouble code, inspecting the wiring and connections around the passenger seat weight sensor, and testing the sensor itself for proper functionality.
What are the repair options for OBDII code B1B88 RAM?
- Repair options may include repairing or replacing damaged wiring, fixing loose connections, replacing the passenger seat weight sensor, or reprogramming the airbag control module.
Is it safe to drive with OBDII code B1B88 RAM present?
- It is not recommended to drive with this code present, as it indicates a potential issue with the airbag system, which can compromise passenger safety in the event of a collision.
Can I reset OBDII code B1B88 RAM on my own?
- While you can clear the code with a diagnostic scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring and potentially endangering passengers.
How much does it cost to repair OBDII code B1B88 RAM?
- The cost of repairs for this code can vary depending on the extent of the issue, the necessary parts replacement, and the labor rates of the repair shop. It is advisable to get a few quotes from different mechanics.
Will OBDII code B1B88 RAM affect my vehicle's performance?
- This code is related to the airbag system and should not affect the overall performance of your vehicle. However, it is crucial to address the issue promptly to ensure the proper functioning of the safety systems.
Should I replace the passenger seat weight sensor myself for code B1B88 RAM?
- Replacing the passenger seat weight sensor can be a complex task that requires proper knowledge and tools. It is recommended to seek assistance from a qualified mechanic to ensure the repair is done correctly and safely.
Discuss the causes and fixes for B1B88 RAM OBDII Code
Code B1B88 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
