B1B7A Dodge Code - Passenger Seat Weight Sensor 3 Left Front Input Circuit High
Quick Answer
If the module detects that the sensor input is greater than 96 +/- 0.6% of the Seat Weight Sensor 5 Volt circuit voltage. Common causes include Faulty Left Front Passenger Seat Weight Sensor, Left Front Passenger Seat Weight Sensor harness is open or shorted, Left Front Passenger Seat Weight Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B7A Dodge indicates Passenger Seat Weight Sensor 3 Left Front Input Circuit High.
- Common causes
- Common causes include Faulty Left Front Passenger Seat Weight Sensor, Left Front Passenger Seat Weight Sensor harness is open or shorted, Left Front Passenger Seat Weight Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B7A Dodge Description
What are the Possible Causes of the DTC B1B7A Dodge?
- Faulty Left Front Passenger Seat Weight Sensor
- Left Front Passenger Seat Weight Sensor harness is open or shorted
- Left Front Passenger Seat Weight Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B7A Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B7A Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B7A Dodge code?
Need more information on how to fix the B1B7A Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B7A Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B7A Dodge Code
1. What does the OBDII code B1B7A mean on a Dodge vehicle?
The B1B7A code indicates an issue with the Passenger Seat Weight Sensor 3 Left Front Input Circuit, specifically that the circuit is experiencing a high voltage condition.
2. What are the common symptoms of the B1B7A code?
Symptoms may include the airbag warning light illuminating, issues with the passenger airbag system, or incorrect weight detection for the passenger seat.
3. What causes the B1B7A code to appear?
Common causes include a faulty seat weight sensor, damaged wiring or connectors, or a malfunction in the airbag control module.
4. Can I drive my Dodge with the B1B7A code active?
While the vehicle may still be drivable, the passenger airbag system may not function properly, which could pose a safety risk in the event of an accident.
5. How can I diagnose the B1B7A code?
Diagnosis typically involves using a scan tool to confirm the code, visually inspecting the seat weight sensor wiring and connectors for damage, and testing the sensor using a multimeter.
6. How do I fix the B1B7A code on my Dodge?
Repairs may include replacing the faulty seat weight sensor, repairing damaged wiring or connectors, or reprogramming or replacing the airbag control module if necessary.
7. How much does it cost to fix the B1B7A code?
Repair costs vary but may range from $100 to $500 depending on whether the issue is a sensor replacement, wiring repair, or module replacement.
8. Can a faulty passenger seat weight sensor cause the airbags to malfunction?
Yes, a faulty sensor can prevent the airbag system from deploying correctly or at all, increasing the risk of injury in an accident.
9. How can I prevent the B1B7A code from occurring again?
Regularly inspect the seat wiring and connectors for wear or damage, and avoid placing excessive weight or stress on the passenger seat.
10. Do I need to reset the airbag system after fixing the B1B7A code?
Yes, after making repairs, you should use a scan tool to clear the code and reset the airbag system to ensure proper functionality.
Discuss the causes and fixes for B1B7A Dodge OBDII Code
Code B1B7A Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
