B1B7A Chrysler Code - Passenger Seat Weight Sensor 3 Left Front Input Circuit High
Quick Answer
If the module detects that the sensor input is greater than 96 +/- 0.6% of the Seat Weight Sensor 5 Volt circuit voltage. Common causes include Faulty Left Front Passenger Seat Weight Sensor, Left Front Passenger Seat Weight Sensor harness is open or shorted, Left Front Passenger Seat Weight Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B7A Chrysler indicates Passenger Seat Weight Sensor 3 Left Front Input Circuit High.
- Common causes
- Common causes include Faulty Left Front Passenger Seat Weight Sensor, Left Front Passenger Seat Weight Sensor harness is open or shorted, Left Front Passenger Seat Weight Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B7A Chrysler Description
What are the Possible Causes of the DTC B1B7A Chrysler?
- Faulty Left Front Passenger Seat Weight Sensor
- Left Front Passenger Seat Weight Sensor harness is open or shorted
- Left Front Passenger Seat Weight Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B7A Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B7A Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B7A Chrysler code?
Need more information on how to fix the B1B7A Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B7A Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B7A Chrysler Code
1. What does the OBDII code B1B7A mean on a Chrysler?
The B1B7A code indicates an issue with the Passenger Seat Weight Sensor 3 Left Front Input Circuit being detected as high, which may affect the airbag system functionality.
2. What are common symptoms of the B1B7A code?
Common symptoms include the airbag warning light being illuminated, improper airbag deployment readiness, and possibly incorrect passenger classification.
3. What causes the B1B7A code to appear?
The code can be caused by a faulty weight sensor, damaged wiring or connectors, a short circuit, or a malfunctioning occupant classification module.
4. Can the B1B7A code affect airbag deployment?
Yes, this issue may prevent the airbag system from functioning correctly, potentially disabling the passenger-side airbag in a crash.
5. How do you diagnose the B1B7A code?
Diagnosis involves scanning the vehicle with an OBDII tool, inspecting the weight sensor wiring and connectors, and testing the sensor and occupant classification module for faults.
6. Can I drive my Chrysler with the B1B7A code?
While the car can still be driven, it is not recommended to ignore this issue as it may compromise passenger safety in the event of an accident.
7. How do you fix the B1B7A code?
Repairs may involve replacing the faulty weight sensor, repairing or replacing damaged wiring/connectors, or reprogramming or replacing the occupant classification module.
8. How much does it cost to repair the B1B7A code?
Repair costs vary, but replacing a seat weight sensor typically ranges from $200 to $500, while module replacement or wiring repairs may increase costs.
9. Can a dead battery cause the B1B7A code?
A dead or weak battery could potentially cause electrical issues, but it is not a common cause for this specific code. Always check the wiring and sensor first.
10. Is the B1B7A code covered under warranty?
If your vehicle is still under warranty and the issue is related to a factory defect, it may be covered. Check with your dealership for confirmation.
Discuss the causes and fixes for B1B7A Chrysler OBDII Code
Code B1B7A Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
