B1B78 Dodge Code - Passenger Seat Weight Sensor 3 Left Front Performance
Quick Answer
During the Occupant Classification Module (OCM) system verification test if the module detects that the sensor input is less than 1.4 volts or greater than 3.6 volts. Common causes include Faulty Left Front Passenger Seat Weight Sensor, Left Front Passenger Seat Weight Sensor harness is open or shorted, Left Front Passenger Seat Weight Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B78 Dodge indicates Passenger Seat Weight Sensor 3 Left Front Performance.
- Common causes
- Common causes include Faulty Left Front Passenger Seat Weight Sensor, Left Front Passenger Seat Weight Sensor harness is open or shorted, Left Front Passenger Seat Weight Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B78 Dodge Description
What are the Possible Causes of the DTC B1B78 Dodge?
- Faulty Left Front Passenger Seat Weight Sensor
- Left Front Passenger Seat Weight Sensor harness is open or shorted
- Left Front Passenger Seat Weight Sensor circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
How to Fix the DTC B1B78 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B78 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B78 Dodge code?
Need more information on how to fix the B1B78 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B78 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B78 Dodge Code
1. What are common symptoms of OBDII code B1B78 in a Dodge related to the passenger seat weight sensor?
- Common symptoms include the airbag warning light illuminating on the dashboard and the passenger airbag system being disabled.
2. What can cause the OBDII code B1B78 in a Dodge related to the passenger seat weight sensor?
- The code B1B78 typically indicates a performance issue with the weight sensor in the left front passenger seat, which may be caused by sensor failure, wiring issues, or a faulty control module.
3. How can I diagnose the OBDII code B1B78 in a Dodge related to the passenger seat weight sensor?
- Diagnosis usually involves using a professional OBDII scanner to read the fault code, checking the wiring and connections to the weight sensor, and testing the sensor itself for proper function.
4. Is it safe to drive with OBDII code B1B78 related to the passenger seat weight sensor in a Dodge?
- It is not recommended to drive with the airbag warning light on, as the passenger airbag system may be compromised. It's important to address the issue promptly to ensure safety in the event of a collision.
5. Can I reset the OBDII code B1B78 related to the passenger seat weight sensor in a Dodge by disconnecting the battery?
- While disconnecting the battery may clear the code temporarily, it is not a permanent solution. The underlying issue causing the code should be diagnosed and repaired to prevent it from reoccurring.
6. How much does it typically cost to repair OBDII code B1B78 related to the passenger seat weight sensor in a Dodge?
- The cost of repair can vary depending on the exact cause of the issue. It may involve replacing the weight sensor, repairing wiring, or reprogramming the control module. Costs can range from a few hundred to over a thousand dollars.
7. Can I repair the OBDII code B1B78 related to the passenger seat weight sensor in a Dodge myself?
- While some DIY enthusiasts may attempt to repair this issue, it is recommended to have it diagnosed and repaired by a qualified mechanic or dealership to ensure the airbag system functions correctly and safely.
8. Are there any recalls or technical service bulletins related to OBDII code B1B78 in Dodge vehicles?
- It's advisable to check with Dodge or the National Highway Traffic Safety Administration (NHTSA) for any recalls or technical service bulletins related to the passenger seat weight sensor issue and OBDII code B1B78.
9. How long does it typically take to repair OBDII code B1B78 related to the passenger seat weight sensor in a Dodge?
- The repair time can vary depending on the exact cause of the issue and the availability of parts. It may take a few hours to a full day to diagnose and repair the passenger seat weight sensor problem.
10. Does the OBDII code B1B78 related to the passenger seat weight sensor in a Dodge affect the overall drivability of the vehicle?
- The code B1B78 primarily relates to the passenger airbag system and does not directly impact the drivability of the vehicle. However, it is crucial for safety in the event of a collision and should be addressed promptly.
Discuss the causes and fixes for B1B78 Dodge OBDII Code
Code B1B78 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
