B1B54 Chrysler Code - 1st Row Passenger Seat Belt Sensor Circuit Low
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current across the Passenger Seat Belt Buckle Switch circuits every 100 ms to verify the integrity of the switch and wiring. Common causes include Faulty Passenger Seat Belt Buckle Switch, Passenger Seat Belt Buckle Switch harness is open or shorted, Passenger Seat Belt Buckle Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B54 Chrysler indicates 1st Row Passenger Seat Belt Sensor Circuit Low.
- Common causes
- Common causes include Faulty Passenger Seat Belt Buckle Switch, Passenger Seat Belt Buckle Switch harness is open or shorted, Passenger Seat Belt Buckle Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B54 Chrysler Description
What are the Possible Causes of the DTC B1B54 Chrysler?
- Faulty Passenger Seat Belt Buckle Switch
- Passenger Seat Belt Buckle Switch harness is open or shorted
- Passenger Seat Belt Buckle Switch circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1B54 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B54 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B54 Chrysler code?
Need more information on how to fix the B1B54 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B54 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B54 Chrysler Code
1. What does the OBDII code B1B54 mean on a Chrysler?
The B1B54 code indicates a problem with the 1st Row Passenger Seat Belt Sensor Circuit, specifically that the circuit is reading a low voltage.
2. What are the symptoms of the B1B54 code in a Chrysler vehicle?
Common symptoms include the seat belt warning light staying on, malfunctioning seat belt chime, or the passenger airbag system not functioning correctly.
3. What causes the B1B54 code to appear?
Possible causes include a faulty seat belt sensor, damaged wiring or connectors in the seat belt circuit, or a damaged control module.
4. Can a loose connection trigger the B1B54 code?
Yes, a loose or corroded connection in the seat belt sensor circuit can cause the code to appear.
5. How do you diagnose the B1B54 code?
Diagnosis involves inspecting the seat belt sensor, checking the wiring and connectors for damage or corrosion, and testing the sensor’s resistance with a multimeter.
6. Can I drive with the B1B54 code active?
While the vehicle may still function, the passenger airbag system might be compromised, posing a safety risk in an accident.
7. How is the B1B54 code fixed?
Repairs may include replacing the seat belt sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming the control module if necessary.
8. Is the B1B54 code covered under warranty?
This depends on the vehicle’s warranty terms and whether the seat belt system is included under coverage. Check with your dealer.
9. Can I reset the B1B54 code without repairs?
You can clear the code with an OBDII scanner, but it will likely return if the underlying issue isn’t resolved.
10. What tools are needed to fix the B1B54 code?
You may need an OBDII scanner, a multimeter for testing resistance, and basic tools for inspecting and repairing wiring or connectors.
Discuss the causes and fixes for B1B54 Chrysler OBDII Code
Code B1B54 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
