B1B2E Dodge Code - 1st Row Passenger Seat Belt Pretensioner Circuit Open
Quick Answer
The Occupant Restraint Controller (ORC) monitors the 1st Row Passenger Seat Belt Pretensioner Circuit. Common causes include Faulty Passenger Seat Belt Pretensioner, Passenger Seat Belt Pretensioner harness is open or shorted, Passenger Seat Belt Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B2E Dodge indicates 1st Row Passenger Seat Belt Pretensioner Circuit Open.
- Common causes
- Common causes include Faulty Passenger Seat Belt Pretensioner, Passenger Seat Belt Pretensioner harness is open or shorted, Passenger Seat Belt Pretensioner circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B2E Dodge Description
What are the Possible Causes of the DTC B1B2E Dodge?
- Faulty Passenger Seat Belt Pretensioner
- Passenger Seat Belt Pretensioner harness is open or shorted
- Passenger Seat Belt Pretensioner circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1B2E Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B2E Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B2E Dodge code?
Need more information on how to fix the B1B2E Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B2E Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B2E Dodge Code
1. What does the OBDII code B1B2E mean on a Dodge vehicle?
The B1B2E code indicates an issue with the 1st Row Passenger Seat Belt Pretensioner Circuit, specifically an open circuit.
2. What are the symptoms of the B1B2E code?
Common symptoms include the airbag warning light illuminating on the dashboard and potentially a malfunctioning passenger seat belt pretensioner.
3. What causes the B1B2E code to appear?
This code can be caused by a damaged seat belt pretensioner, a disconnected or corroded electrical connector, broken wiring, or a malfunctioning airbag control module.
4. Is it safe to drive with the B1B2E code active?
It’s not recommended to drive with this code active, as it may indicate that part of the airbag system is not functioning, which could compromise passenger safety in a crash.
5. How can I diagnose the B1B2E code?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the passenger seat belt pretensioner, checking wiring and connectors for damage, and testing the airbag system with specialized tools.
6. Can I fix the B1B2E code myself?
If you’re skilled with automotive electrical systems, you may be able to fix it by repairing or replacing damaged wires or connectors. For more complex issues, it’s best to consult a professional.
7. How much does it cost to fix the B1B2E code?
Repair costs can vary depending on the issue. Replacing the seat belt pretensioner can cost between $200-$500, while wiring repairs might cost significantly less.
8. Can a faulty airbag control module cause the B1B2E code?
Yes, a malfunctioning airbag control module can sometimes trigger this code, though it’s less common than wiring or pretensioner issues.
9. How can I prevent the B1B2E code from returning?
Ensure all electrical connections in the airbag system are secure, avoid tampering with seat belt components, and address any warning lights promptly.
10. Is a recall associated with the B1B2E code on Dodge vehicles?
There’s no universal recall for this code, but it’s worth checking with Dodge or the NHTSA to see if your specific vehicle is under any related recalls.
Discuss the causes and fixes for B1B2E Dodge OBDII Code
Code B1B2E Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
