B1B0F RAM Code - Passenger Airbag Squib 2 Circuit Shorted Together
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B0F RAM indicates Passenger Airbag Squib 2 Circuit Shorted Together.
- Common causes
- Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B0F RAM Description
What are the Possible Causes of the DTC B1B0F RAM?
- Faulty Passenger Airbag Squib 2
- Passenger Airbag Squib 2 harness is open or shorted
- Passenger Airbag Squib 2 circuit poor electrical connection
- Faulty Passenger Airbag
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1B0F RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B0F RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B0F RAM code?
Need more information on how to fix the B1B0F RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B0F RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B0F RAM Code
1. What does the OBDII code B1B0F mean?
The code B1B0F indicates a fault in the passenger airbag squib 2 circuit, specifically that the circuit is shorted together, which could impact airbag deployment.
2. What are the symptoms of the B1B0F code?
Common symptoms include the airbag warning light being illuminated on the dashboard and a potential malfunction in the passenger airbag system.
3. What causes the B1B0F code to appear?
This code is typically caused by damaged wiring, corroded connectors, a faulty airbag squib, or a short circuit in the passenger airbag system.
4. Is it safe to drive with the B1B0F code?
No, it is not safe to drive with this code because it indicates a potential failure in the airbag system, which could compromise passenger safety during an accident.
5. How can I diagnose the B1B0F code?
Use an OBDII scanner to confirm the code, then inspect the wiring, connectors, and components of the passenger airbag system for damage or corrosion.
6. Can a loose connection cause the B1B0F code?
Yes, a loose or poor connection in the passenger airbag wiring harness or connectors can trigger this code.
7. How do I fix the B1B0F code?
Repairs may include replacing damaged wiring, cleaning or reconnecting corroded connectors, or replacing the faulty passenger airbag squib.
8. What tools are needed to repair the B1B0F code?
You'll need an OBDII scanner, a multimeter to check for continuity, and possibly basic hand tools for wire repair or component replacement.
9. Can the B1B0F code be cleared without repairs?
While you can clear the code with an OBDII scanner, it will likely return unless the underlying issue is resolved.
10. Do I need a professional to fix the B1B0F code?
If you’re unfamiliar with airbag systems or electrical diagnostics, it’s recommended to have a professional technician address the issue to ensure safety.
Discuss the causes and fixes for B1B0F RAM OBDII Code
Code B1B0F RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
