B1B0F Dodge Code - Passenger Airbag Squib 2 Circuit Shorted Together
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B0F Dodge indicates Passenger Airbag Squib 2 Circuit Shorted Together.
- Common causes
- Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B0F Dodge Description
What are the Possible Causes of the DTC B1B0F Dodge?
- Faulty Passenger Airbag Squib 2
- Passenger Airbag Squib 2 harness is open or shorted
- Passenger Airbag Squib 2 circuit poor electrical connection
- Faulty Passenger Airbag
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1B0F Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B0F Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B0F Dodge code?
Need more information on how to fix the B1B0F Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B0F Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B0F Dodge Code
1. What does the OBDII code B1B0F mean on a Dodge vehicle?
The B1B0F code indicates that the passenger airbag squib 2 circuit has a shorted connection, which affects the functionality of the passenger airbag system.
2. What are the symptoms of the B1B0F code?
Common symptoms include the airbag warning light illuminating on the dashboard and possible deactivation of the passenger airbag.
3. What causes the B1B0F code to appear?
This code is typically caused by damaged wiring, a failed passenger airbag squib, a faulty clock spring, or a defective airbag control module.
4. Is it safe to drive with the B1B0F code present?
No, it is not safe, as this code indicates a potential issue with the airbag system, which may prevent it from deploying properly in an accident.
5. How do I diagnose the B1B0F code?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the airbag wiring and connectors, and testing the squib resistance with a multimeter.
6. Can a loose connection cause the B1B0F code?
Yes, a loose or corroded connector in the passenger airbag circuit can trigger this code.
7. How much does it cost to repair a B1B0F code issue?
Repair costs can range from $100 to $1,000, depending on whether the issue is a simple wiring repair or replacement of a major component like the airbag module.
8. Can I clear the B1B0F code without fixing the issue?
Clearing the code without addressing the underlying problem will not resolve the issue, and the code will likely return.
9. What tools are needed to repair the B1B0F code?
Tools commonly needed include an OBDII scanner, a multimeter, and basic hand tools for accessing and inspecting wiring and connectors.
10. Who should repair the B1B0F code issue?
Airbag system repairs should be handled by a qualified automotive technician due to the complexity and safety risks involved.
Discuss the causes and fixes for B1B0F Dodge OBDII Code
Code B1B0F Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
