B1B0E RAM Code - Passenger Airbag Squib 2 Circuit Open
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B0E RAM indicates Passenger Airbag Squib 2 Circuit Open.
- Common causes
- Common causes include Faulty Passenger Airbag Squib 2, Passenger Airbag Squib 2 harness is open or shorted, Passenger Airbag Squib 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B0E RAM Description
What are the Possible Causes of the DTC B1B0E RAM?
- Faulty Passenger Airbag Squib 2
- Passenger Airbag Squib 2 harness is open or shorted
- Passenger Airbag Squib 2 circuit poor electrical connection
- Faulty Passenger Airbag
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1B0E RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B0E RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B0E RAM code?
Need more information on how to fix the B1B0E RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B0E RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B0E RAM Code
1. What does the OBDII code B1B0E mean?
The B1B0E code indicates an open circuit in Passenger Airbag Squib 2, meaning the airbag system has detected a fault in the wiring or connection for the passenger airbag deployment system.
2. What are the symptoms of the B1B0E code?
Symptoms include the airbag warning light on the dashboard, possible deactivation of the passenger airbag, and a stored trouble code in the vehicle's OBDII system.
3. What causes the B1B0E code to appear?
Common causes include damaged or corroded wiring, faulty connectors, a defective passenger airbag, or issues with the clock spring or control module.
4. Can I still drive safely with the B1B0E code?
While the vehicle may still be drivable, the passenger airbag may not deploy in a collision, posing a serious safety risk. It’s recommended to address the issue as soon as possible.
5. How do you diagnose the B1B0E code?
Diagnosis involves scanning the airbag system with an OBDII tool, inspecting the wiring and connectors for damage or corrosion, and testing the airbag squib circuit for continuity.
6. How can the B1B0E code be fixed?
Repairs may include replacing damaged wiring, cleaning or reconnecting loose connectors, replacing a faulty passenger airbag module, or reprogramming the airbag control module.
7. Can disconnecting the battery clear the B1B0E code?
Disconnecting the battery may reset the airbag system temporarily, but the underlying issue causing the code will need to be repaired for it to stay cleared.
8. Is the B1B0E code covered under warranty?
This depends on your vehicle’s warranty terms and conditions. Airbag-related repairs may be covered if your vehicle is still under warranty.
9. What tools are needed to repair the B1B0E code?
Tools may include an OBDII scanner, a multimeter for testing continuity, and basic hand tools for inspecting and repairing wiring or connectors.
10. Can I fix the B1B0E code myself?
While basic inspections like checking connectors can be done by a DIYer, airbag system repairs are complex and should be handled by a qualified technician to ensure safety.
Discuss the causes and fixes for B1B0E RAM OBDII Code
Code B1B0E RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
